form10q.htm


UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
 
 

FORM 10-Q

 
 (Mark One)
 
x
QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF HE SECURITIES EXCHANGE ACT OF 1934
 
For the quarterly period ended June 30, 2010
 
OR
 
¨
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
 
For the transition period _____ to _____.
 
Commission file number: 000-50644


Cutera, Inc.
(Exact name of registrant as specified in its charter)

 
Delaware
77-0492262
(State or other jurisdiction of incorporation or organization)
(I.R.S. employer identification no.)
 
3240 Bayshore Blvd., Brisbane, California 94005
(Address of principal executive offices)
 
(415) 657-5500
(Registrant’s telephone number, including area code)


Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes   x     No   ¨
 
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes   ¨     No   ¨
 
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act (check one):
 
Large accelerated filer  ¨        Accelerated filer  x        Non-accelerated filer  ¨        Smaller reporting company  ¨
 
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act.):    Yes  ¨    No  x
 
The number of shares of Registrant’s common stock issued and outstanding as of July 26, 2010 was 13,557,421.
 


 
 

 

CUTERA, INC.
 
FORM 10-Q
 
TABLE OF CONTENTS

 
 
 
 
 
 
 
 
 
Page
PART I
 
FINANCIAL INFORMATION
 
 
 
 
 
 
 
Item 1.
 
 
3
 
 
 
3
 
 
 
4
 
 
 
5
 
 
 
6
Item 2.
 
 
14
Item 3.
 
 
26
Item 4.
 
 
27
 
 
 
 
 
PART II
 
OTHER INFORMATION
 
 
 
 
 
 
 
Item 1.
 
 
27
Item 1A
 
 
28
Item 2.
 
 
38
Item 3.
 
 
38
Item 4.
 
 
38
Item 5.
 
 
38
Item 6.
 
 
39
 
 
 
40


PART I. FINANCIAL INFORMATION
 
ITEM 1.
FINANCIAL STATEMENTS
 
CUTERA, INC.
 
CONDENSED CONSOLIDATED BALANCE SHEETS
 
(in thousands)
 
(unaudited)
 
 
 
June 30,
 
 
December, 31,
 
 
 
2010
 
 
2009
 
Assets
 
 
 
 
 
 
Current assets:
 
 
 
 
 
 
Cash and cash equivalents
 
$
31,697
 
 
$
22,829
 
Marketable investments
 
 
60,317
 
 
 
76,780
 
Accounts receivable, net
 
 
3,824
 
 
 
3,327
 
Inventories
 
 
6,955
 
 
 
6,408
 
Deferred tax asset
 
 
185
 
 
 
175
 
Other current assets and prepaid expenses
 
 
3,020
 
 
 
2,785
 
Total current assets
 
 
105,998
 
 
 
112,304
 
 
 
 
 
 
 
 
 
 
Property and equipment, net
 
 
708
 
 
 
847
 
Long-term investments
 
 
7,115
 
 
 
7,275
 
Intangibles, net
 
 
733
 
 
 
829
 
Deferred tax asset, net of current portion
 
 
97
 
 
 
97
 
Total assets
 
$
114,651
 
 
$
121,352
 
 
 
 
 
 
 
 
 
 
Liabilities and Stockholders' Equity
 
 
 
 
 
 
 
 
Current liabilities:
 
 
 
 
 
 
 
 
Accounts payable
 
$
1,495
 
 
$
1,081
 
Accrued liabilities
 
 
5,922
 
 
 
9,048
 
Deferred revenue
 
 
5,898
 
 
 
6,160
 
Total current liabilities
 
 
13,315
 
 
 
16,289
 
 
 
 
 
 
 
 
 
 
Deferred rent
 
 
1,303
 
 
 
1,493
 
Deferred revenue, net of current portion
 
 
1,373
 
 
 
1,968
 
Income tax liability
 
 
732
 
 
 
749
 
Total liabilities
 
 
16,723
 
 
 
20,499
 
 
 
 
 
 
 
 
 
 
Commitments and Contingencies (Note 8)
 
 
 
 
 
 
 
 
Stockholders’ equity:
 
 
 
 
 
 
 
 
Common stock
 
 
14
 
 
 
13
 
Additional paid-in capital
 
 
88,189
 
 
 
85,248
 
Retained earnings
 
 
11,475
 
 
 
17,254
 
Accumulated other comprehensive loss
   
(1,750
)
   
(1,662
)
Total stockholders’ equity
 
 
97,928
 
 
 
100,853
 
Total liabilities and stockholders’ equity
 
$
114,651
 
 
$
121,352
 

The accompanying notes are an integral part of these unaudited condensed consolidated financial statements.


CUTERA, INC.
 
CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS
 
(in thousands, except per share data)
 
(unaudited)
 
 
 
Three Months Ended
 
 
Six Months Ended
 
 
 
June 30,
 
 
June 30,
 
 
 
2010
 
 
2009
 
 
2010
 
 
2009
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Net revenue
 
$
12,217
 
 
$
11,665
 
 
$
25,966
 
 
$
26,095
 
Cost of revenue
 
 
5,335
 
 
 
5,130
 
 
 
11,164
 
 
 
11,066
 
Gross profit
 
 
6,882
 
 
 
6,535
 
 
 
14,802
 
 
 
15,029
 
 
 
 
   
 
 
 
 
 
 
 
 
 
 
 
 
Operating expenses:
 
 
   
 
 
 
 
 
 
 
 
 
 
 
 
Sales and marketing
 
 
6,452
 
 
 
6,071
 
 
 
12,813
 
 
 
13,074
 
Research and development
 
 
1,506
 
 
 
1,495
 
 
 
2,960
 
 
 
3,238
 
General and administrative
 
 
2,744
 
 
 
3,616
 
 
 
4,986
 
 
 
6,136
 
Litigation settlement
 
 
-
 
 
 
-
 
 
 
-
 
 
 
850
 
Total operating expenses
 
 
10,702
 
 
 
11,182
 
 
 
20,759
 
 
 
23,298
 
Loss from operations
 
 
(3,820
)
 
 
(4,647
)
 
 
(5,957
)
 
 
(8,269
)
Interest and other income, net
 
 
141
 
 
 
511
 
 
 
307
 
 
 
1,110
 
Loss before income taxes
 
 
(3,679
)
 
 
(4,136
)
 
 
(5,650
)
 
 
(7,159
)
Provision (benefit) for income taxes
 
 
82
 
 
 
(1,772
)
 
 
129
 
 
 
(2,967
)
Net loss
 
$
(3,761
)
 
$
(2,364
)
 
$
(5,779
)
 
$
(4,192
)
 
 
 
   
 
 
 
 
 
 
   
 
 
 
 
Net loss per share:
 
 
   
 
 
 
 
 
 
   
 
 
 
 
Basic and Diluted
 
$
(0.28
)
 
$
(0.18
)
 
$
(0.43
)
 
$
(0.32
)
Weighted-average number of shares used in per share calculations:
 
 
   
 
 
 
 
 
 
 
 
 
 
 
 
Basic and Diluted
 
 
13,501
 
 
 
13,317
 
 
 
13,473
 
 
 
13,219
 

The accompanying notes are an integral part of these unaudited condensed consolidated financial statements.


CUTERA, INC.
 
CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS
 
(in thousands)
 
(unaudited)

 
 
Six Months Ended
 
 
 
June 30,
 
 
 
2010
 
 
2009
 
Cash flows from operating activities:
 
 
 
 
 
 
Net loss
 
$
(5,779
)
 
$
(4,192
)
Adjustments to reconcile net loss to net cash used in operating activities:
 
 
   
 
 
 
 
Stock-based compensation
 
 
2,589
 
 
 
2,501
 
Tax deficit from stock-based compensation
 
 
-
 
 
 
(113
)
Depreciation and amortization
 
 
393
 
 
 
453
 
Provision for excess and obsolete inventories
 
 
86
 
 
 
503
 
Provision for doubtful accounts receivable
 
 
(84
)
 
 
553
 
Gain on sale of marketable investments
   
66
     
103
 
Change in deferred tax asset
 
 
(10
)
 
 
34
 
Changes in assets and liabilities:
 
 
   
 
 
 
 
Accounts receivable
 
 
(413
)
 
 
2,411
 
Inventories
 
 
(633
)
 
 
722
 
Other current assets and prepaid expenses
 
 
941
 
 
 
(2,070
)
Accounts payable
 
 
414
 
 
 
(563
)
Accrued liabilities
 
 
(3,206
)
 
 
(1,111
)
Deferred rent
 
 
(110
)
 
 
(110
)
Deferred revenue
 
 
(857
)
 
 
(2,025
)
Income tax liability
 
 
(17
)
 
 
(85
)
Net cash used in operating activities
 
 
(6,620
)
 
 
(2,989
)
 
 
 
   
 
 
 
 
Cash flows from investing activities:
 
 
   
 
 
 
 
Acquisition of property and equipment
 
 
(158
)
 
 
(98
)
Proceeds from sales of marketable investments
 
 
29,701
 
 
 
16,352
 
Proceeds from maturities of marketable investments
 
 
19,325
 
 
 
2,245
 
Purchase of marketable investments
 
 
(33,733
)
 
 
(16,884
)
Net cash provided by investing activities
 
 
15,135
 
 
 
1,615
 
 
 
 
   
 
 
 
 
Cash flows from financing activities:
 
 
   
 
 
 
 
Proceeds from exercise of stock options and employee stock purchase plan
 
 
353
 
 
 
279
 
Net cash provided by financing activities
 
 
353
 
 
 
279
 
 
 
 
   
 
 
 
 
Net increase (decrease) in cash and cash equivalents
 
 
8,868
 
 
 
(1,095
)
Cash and cash equivalents at beginning of period
 
 
22,829
 
 
 
36,540
 
Cash and cash equivalents at end of period
 
$
31,697
 
 
$
35,445
 
 
The accompanying notes are an integral part of these unaudited condensed consolidated financial statements.


CUTERA, INC.

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

Note 1. Summary of Significant Accounting Policies

Description of Operations and Principles of Consolidation.

Cutera, Inc. (Cutera or the Company) is a global provider of laser and other light-based aesthetic systems for practitioners worldwide. The Company designs, develops, manufactures, and markets the CoolGlide, Xeo and Solera product platforms for use by physicians and other qualified practitioners to allow its customers to offer safe and effective aesthetic treatments to their customers. The Xeo and Solera platforms offer multiple hand pieces and applications, which allow customers to upgrade their systems (Upgrades revenue). In addition to systems and upgrades revenue, the Company generates revenue from the sale of extended warranty contracts, labor and materials for products that are out of warranty, Titan hand piece refills, and the distribution of third party dermal filler and cosmeceuticals in Japan.

Headquartered in Brisbane, California, the Company has wholly-owned subsidiaries in Australia, Canada, France, Japan, Spain, Switzerland and United Kingdom that market, sell and service its products outside of the United States. The Condensed Consolidated Financial Statements include the accounts of the Company and its subsidiaries. All inter-company transactions and balances have been eliminated.

Business Segment

In accordance with the Financial Accounting Standards Board (FASB) Accounting Standards Codification (ASC) 280 guidance on disclosures about segments of an enterprise and related information, operating segments are identified as components of an enterprise about which separate discrete financial information is available for evaluation by the chief operating decision maker, or decision-making group, in making decisions how to allocate resources and assess performance. Our chief decision maker, as defined under the FASB’s ASC 280 guidance, is a combination of the Chief Executive Officer; and the Executive Vice President and Chief Financial Officer. To date, the Company has viewed its operations, managed its business, and used one measurement of profitability for the one operating segment – the sale of aesthetic medical equipment and services, and distribution of cosmeceuticals and dermal filler products, to qualified medical practitioners. In addition, substantially all of the Company’s long-lived assets are located in one facility in the United States. As a result, the financial information disclosed herein represents all of the material financial information related to the Company’s operating segment.

Unaudited Interim Financial Information

The financial information filed is unaudited. The Condensed Consolidated Financial Statements included in this report reflect all adjustments (consisting only of normal recurring adjustments) that the Company considers necessary for the fair statement of the results of operations for the interim periods covered and of the financial condition of the Company at the date of the interim balance sheet. The December 31, 2009 Condensed Consolidated Balance Sheet was derived from audited financial statements, but does not include all disclosures required by generally accepted accounting principles in the United States of America (GAAP). The results for interim periods are not necessarily indicative of the results for the entire year or any other interim period. The Condensed Consolidated Financial Statements should be read in conjunction with the Company’s financial statements and the notes thereto included in the Company’s annual report on Form 10-K for the year ended December 31, 2009 filed with the Securities and Exchange Commission, or SEC, on March 15, 2010.

Use of Estimates

The preparation of interim Condensed Consolidated Financial Statements in conformity with GAAP requires the Company’s management to make estimates and assumptions that affect the amounts reported and disclosed in the Condensed Consolidated Financial Statements and the accompanying notes. Actual results could differ materially from those estimates. On an ongoing basis, the Company evaluates these estimates, including those related to warranty obligation, sales commission, accounts receivable and sales allowances, provision for excess and obsolete inventories, fair values of marketable and long-term investments, fair values of acquired intangible assets, useful lives of intangible assets and property and equipment, recoverability of deferred tax assets, and effective income tax rates, among others. Management bases these estimates on historical experience and on various other assumptions that are believed to be reasonable, the results of which form the basis for making judgments about the carrying values of assets and liabilities.

Significant Accounting Policies

The Company’s significant accounting policies are disclosed in the Company’s annual report on Form 10-K for the year ended December 31, 2009 filed with the SEC on March 15, 2010, and have not changed significantly as of June 30, 2010.


Recent Accounting Updates

In October 2009, the FASB issued Accounting Standards Update (ASU) No. 2009-13, “Multiple-Deliverable Revenue Arrangements a Consensus of the FASB Emerging Issues Task Force” an update to ASC Topic 605, “Revenue Recognition.” This update requires the allocation of consideration among separately identified deliverables contained within an arrangement, based on their related selling prices. This update will be effective for annual reporting periods beginning January 1, 2011.  The Company is currently evaluating the impact of this update on its financial position, results of operations, cash flows, and disclosures.

In January 2010, the FASB issued ASU No. 2010-06, “Improving Disclosures about Fair Value Measurements” an update to ASC Topic 820, “Fair Value Measurements and Disclosures.”  This update requires an entity to: (i) disclose separately the amounts of significant transfers in and out of Level 1 and Level 2 fair value measurements and describe the reasons for the transfers and (ii) present separate information for Level 3 activity pertaining to gross purchases, sales, issuances, and settlements.  This guidance became effective for us in the quarter ended March 31, 2010, except that the disclosure on the roll forward activities for Level 3 fair value measurements will become effective for us with the reporting period beginning January 1, 2011. Other than requiring additional disclosures, adoption of this new guidance did not have a material impact on our financial statements.
 
Note 2. Balance Sheet Details
 
Cash and Cash Equivalents, Marketable Investments and Long-Term Investments:
 
The Company considers all highly liquid investments, with an original maturity of three months or less at the time of purchase, to be cash equivalents. Investments in debt securities are accounted for as “available-for-sale” securities, carried at fair value with unrealized gains and losses reported in other comprehensive loss, held for use in current operations and classified in current assets as “Marketable investments” and in long term assets as “Long-term investments.”
 
The following is a summary of cash and cash equivalents, marketable investments and long-term investments (in thousands):

June 30, 2010
 
Amortized
 Cost
 
Gross
 Unrealized
 Gains
 
Gross
 Unrealized
 Losses
 
Fair
 Market
 Value
 
Cash and cash equivalents
 
 
$
31,697
 
 
$
 
 
$
 
 
$
31,697
 
Marketable investments- debt securities
 
 
 
60,277
 
 
 
49
 
 
 
(9
)
 
 
60,317
 
Long-term investments in auction rate securities
 
 
 
8,675
 
 
 
 
 
 
(1,560
)
 
 
7,115
 
Total cash and cash equivalents, marketable investments and long-term investments
 
 
$
100,649
 
 
$
49
 
 
$
(1,569
)
 
$
99,129
 

December 31, 2009
 
Amortized
 Cost
 
Gross
 Unrealized
 Gains
 
Gross
 Unrealized
 Losses
 
Fair
 Market
 Value
 
Cash and cash equivalents
 
 
$
22,829
 
 
$
 
 
$
 
 
$
22,829
 
Marketable investments:
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Municipal securities
 
 
 
76,512
 
 
 
182
 
 
 
(14
)
 
 
76,680
 
Auction rate securities
 
 
 
100
 
 
 
 
 
 
 
 
 
100
 
Total marketable investments
 
 
 
76,612
 
 
 
182
 
 
 
(14
)
 
 
76,780
 
Long-term investments in auction rate securities
 
 
 
8,875
 
 
 
 
 
 
(1,600
)
 
 
7,275
 
Total cash and cash equivalents, marketable investments and long-term investments
 
 
$
108,316
 
 
$
182
 
 
$
(1,614
)
 
$
106,884
 
 
Fair Value of Financial Instruments:
 
Fair value is defined as the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date. The fair value hierarchy distinguishes between (1) market participant assumptions developed based on market data obtained from independent sources (observable inputs) and (2) an entity’s own assumptions about market participant assumptions developed based on the best information available in the circumstances (unobservable inputs). The fair value hierarchy consists of three broad levels, which gives the highest priority to unadjusted quoted prices in active markets for identical assets or liabilities (Level 1) and the lowest priority to unobservable inputs (Level 3). The three levels of the fair value hierarchy are described below:

•           Level 1: Quoted prices (unadjusted) in active markets that are accessible at the measurement date for assets or liabilities.


•           Level 2: Directly or indirectly observable inputs as of the reporting date through correlation with market data, including quoted prices for similar assets and liabilities in active markets and quoted prices in markets that are not active. Level 2 also includes assets and liabilities that are valued using models or other pricing methodologies that do not require significant judgment since the input assumptions used in the models, such as interest rates and volatility factors, are corroborated by readily observable data from actively quoted markets for substantially the full term of the financial instrument.

•           Level 3: Unobservable inputs that are supported by little or no market activity and reflect the use of significant management judgment. These values are generally determined using pricing models for which the assumptions utilize management’s estimates of market participant assumptions.

In determining fair value, the Company utilizes valuation techniques that maximize the use of observable inputs and minimize the use of unobservable inputs to the extent possible as well as considers counterparty credit risk in its assessment of fair value.

As of June 30, 2010, financial assets measured and recognized at fair value on a recurring basis and classified under the appropriate level of the fair value hierarchy as described above was as follows (in thousands):

 
 
Level 1
 
 
Level 2
 
 
Level 3
 
 
Total
 
Cash equivalents
 
$
29,890
 
 
$
 
 
$
 
 
$
29,890
 
Securities available for sale:
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Marketable investments–debt securities
 
 
 
 
 
60,317
 
 
 
 
 
 
60,317
 
Long-term investments–auction rate securities
 
 
 
 
 
 
 
 
7,115
 
 
 
7,115
 
Total assets at fair value
 
$
29,890
 
 
$
60,317
 
 
$
7,115
 
 
$
97,322
 
 
The Company’s Level 1 financial assets are money market funds and highly liquid debt instruments of U.S. federal and municipal governments and their agencies with stated maturities of three months or less from the date of purchase, whose fair values are based on quoted market prices. The Company’s Level 2 financial assets are highly liquid debt instruments of U.S. federal and municipal governments and their agencies as well as corporate bonds issued with a Federal Deposit Insurance Corporations (FDIC) guarantee under the U.S. Treasury Department’s Temporary Liquidity Guarantee Program (TLGP). These securities have stated maturities of greater than three months, whose fair values are obtained from readily-available pricing sources for the identical underlying security that may, or may not, be actively traded.

At June 30, 2010, observable market information was not available to determine the fair value of the Company’s ARS investments. Therefore, the fair value is based on valuation models that relied on Level 3 inputs including those that are based on expected cash flow streams and collateral values, assessments of counterparty credit quality, default risk underlying the security, market discount rates and overall capital market liquidity. The valuation of the Company’s ARS investment portfolio is subject to uncertainties that are difficult to predict. Factors that may impact the valuations in the future include changes to credit ratings of the securities, as well as to the underlying assets supporting those securities, rates of default of the underlying assets, underlying collateral value, discount rates, counterparty risk and ong oing strength and quality of market credit and liquidity. These financial instruments are classified within Level 3 of the fair value hierarchy.

The table presented below summarizes the change in carrying value of the Company’s financial assets (in thousands):

 
 
Level 1
 
 
Level 2
 
 
Level 3
 
 
Total
 
Beginning balance, January 1, 2010
 
$
19,346
 
 
$
76,780
 
 
$
7,275
 
 
$
103,401
 
Total gains or losses:
 
 
 
 
 
 
   
 
 
 
 
 
 
 
 
Included in earnings (or changes in net assets)
   
1
     
(67
)
   
     
(66
)
Included in other comprehensive loss
   
(32
)
   
(62
)
   
40
     
(54
)
Purchases, issuance, sales and settlements (net):
 
 
10,575
 
 
 
(16,334
)
 
 
(200
)
 
 
(5,959
)
Ending balance, June 30, 2010
 
$
29,890
 
 
$
60,317
 
 
$
7,115
 
 
$
97,322
 

Other Current Assets and Prepaid Expenses:
 
Other current assets and prepaid expenses consist of the following (in thousands):

 
 
June 30,
2010
 
 
December 31,
2009
 
Tax receivable
 
$
1,519
 
 
$
1,517
 
Deposits
 
 
607
 
 
 
737
 
Prepaid expense
 
 
894
 
 
 
531
 
 
 
$
3,020
 
 
$
2,785
 


Inventories:
 
Inventories consist of the following (in thousands):

 
 
June 30,
 2010
 
 
December 31,
 2009
 
Raw materials
 
$
4,193
 
 
$
3,775
 
Finished goods
 
 
2,762
 
 
 
2,633
 
 
 
$
6,955
 
 
$
6,408
 
 
Intangible Assets:
 
Intangible assets comprised of a patent sublicense acquired from Palomar in 2006, a technology sublicense acquired in 2002 and an other intangible asset acquired in 2007. The components of intangible assets were as follows (in thousands):
 
 
   
June 30, 2010
 
   
Gross Carrying
Amount
   
Accumulated
Amortization
Amount
   
Net Carrying
Amount
 
Patent sublicense
 
$
1,218
   
$
586
   
$
632
 
Technology sublicense
   
538
     
437
     
101
 
Total
 
$
1,756
   
$
1,023
   
$
733
 
 
 
 
 
December 31, 2009
 
 
 
Gross Carrying
 Amount
   
Accumulated Amortization
 Amount
   
Net Carrying
 Amount
 
Patent sublicense
  $ 1,218     $ 517     $ 701  
Technology sublicense
    538       410       128  
Other intangibles
    20       20        
Total
  $ 1,776     $ 947     $ 829  
 
Amortization expense for intangible assets was $96,000 for the six months ended June 30, 2010 and $99,000 for the six months ended June 30, 2009.

Based on intangible assets recorded at June 30, 2010, and assuming no subsequent additions to, or impairment of the underlying assets, the remaining estimated annual amortization expense is expected to be as follows (in thousands):
 
Fiscal Year Ending December 31,
 
 
 
2010 remainder
 
$
96
 
2011
 
 
192
 
2012
 
 
158
 
2013
 
 
138
 
2014
 
 
138
 
Thereafter
 
 
11
 
Total
 
$
733
 


Note 3. Stock-based Compensation Expense
 
Total pre-tax stock-based compensation expense by department recognized during the three and six months ended June 30, 2010 and 2009 was as follows (in thousands):

 
 
Three Months Ended
 June 30,
 
 
Six Months Ended
 June 30,
 
 
 
2010
 
 
2009
 
 
2010
 
 
2009
 
Cost of revenue
 
$
228
 
 
$
196
 
 
$
375
 
 
$
407
 
Sales and marketing
 
 
357
 
 
 
276
 
 
 
588
 
 
 
567
 
Research and development
 
 
166
 
 
 
66
 
 
 
262
 
 
 
248
 
General and administrative
 
 
1,010
 
 
 
918
 
 
 
1,364
 
 
 
1,279
 
Total stock-based compensation expense
 
$
1,761
 
 
$
1,456
 
 
$
2,589
 
 
$
2,501
 

Note 4. Net Loss Per Share
 
Basic net loss per share is calculated by dividing net loss by the weighted-average number of common shares outstanding during the year. Diluted net loss per common share is the same as basic net loss per common share, as the effect of the potential common stock equivalents is anti-dilutive and as such is excluded from the calculations of the diluted net loss per share.

The following table sets forth the computation of basic and diluted net loss and the weighted average number of shares used in computing basic and diluted net loss per share (in thousands):

 
 
Three Months Ended
 June 30,
 
 
Six Months Ended
 June 30,
 
 
 
2010
 
 
2009
 
 
2010
 
 
2009
 
Numerator:
 
 
 
 
 
 
 
 
 
 
 
 
Net loss – Basic and Diluted
 
$
(3,761
)
 
$
(2,364
)
 
$
(5,779
)
 
$
(4,192
)
Denominator:
 
 
   
 
 
 
 
 
 
 
 
 
 
 
 
Weighted-average number of common shares outstanding used in computing basic and diluted net loss per share
 
 
13,501
 
 
 
13,317
 
 
 
13,473
 
 
 
13,219
 
 
Anti-dilutive securities
 
The following number of shares outstanding, prior to the application of the treasury stock method, were excluded from the computation of diluted net loss per common share for the periods presented because including them would have had an anti-dilutive effect (in thousands):
 
 
 
Three Months Ended
June 30,
 
 
Six Months Ended
June 30,
 
 
 
2010
 
 
2009
 
 
2010
 
 
2009
 
Options to purchase common stock
 
 
3,058
 
 
 
2,712
 
 
 
2,881
 
 
 
2,729
 
Restricted stock units
 
 
46
 
 
 
11
 
 
 
23
 
 
 
11
 
Employee stock purchase plan shares
 
 
42
 
 
 
65
 
 
 
42
 
 
 
65
 
Total
 
 
3,146
 
 
 
2,788
 
 
 
2,946
 
 
 
2,805
 

Note 5. Service Contract Revenue
 
Service contract revenue is recognized on a straight-line basis over the period of the applicable service contract. The following table provides changes in deferred service contract revenue for the six months ended June 30, 2010 and 2009 (in thousands):
 
 
 
June 30,
 
 
 
2010
 
 
2009
 
Beginning Balance
 
$
8,128
 
 
$
11,665
 
Add: Payments received
 
 
3,818
 
 
 
3,175
 
Less: Revenue recognized
 
 
(4,778
)
 
 
(5,200
)
Ending Balance
 
$
7,168
 
 
$
9,640
 
 
Costs incurred under service contracts were $3.1 million for the six months ended June 30, 2010 and $2.4 million for the six months ended June 30, 2009 and are recognized as incurred.


Note 6. Comprehensive Loss
 
Comprehensive loss generally represents all changes in stockholders’ equity except those resulting from investments or contributions by stockholders. The Company’s unrealized gains and loss, net on marketable investments represents the only component of other comprehensive loss that is excluded from net loss. The changes in components of comprehensive loss for the periods presented were as follows (in thousands):

   
Three Months Ended
June 30,
   
Six Months Ended 
June 30,
 
    2010    
2009
   
2010
   
2009
 
Net loss
  $ (3,761 )   $ (2,364 )   $ (5,779 )   $ (4,192 )
Net change in unrealized gain (loss) on available-for sale-securities
    (22 )     1,931       (88     1,740  
Change in income tax effect on unrealized gain (loss) on available-for sale-securities 
          (8           67  
Comprehensive loss
  $ (3,783 )   $ (441 )   $ (5,867 )   $ (2,385 )

Note 7. Income Taxes
 
The Company’s income tax provision for the three and six months ended June 30, 2010 is primarily related to income taxes of the Company’s non U.S. operations. The Company’s income tax benefit for the three and six months ended June 30, 2009 reflects applicable United States federal and state income tax and the tax impact of non-U.S. operations, reduced primarily by tax exempt interest income and research and development (R&D) tax credit. The Company recorded an income tax provision of $82,000 during the three months ended June 30, 2010 and $129,000 during the six months ended June 30, 2010. The Company recorded an income tax benefit of $1.8 million during the three months ended June 30, 2009 and $3.0 million during the six months ended June 30, 2009.

The Company utilizes the asset and liability method of accounting for income taxes, under which deferred taxes are determined based on the temporary differences between the financial statement and tax basis of assets and liabilities using tax rates expected to be in effect during the years in which the basis differences reverse. A valuation allowance is recorded when it is more likely than not that some of the deferred tax assets will not be realized. Significant management judgment is required in determining any valuation allowance recorded against deferred tax assets. In evaluating the ability to recover deferred tax assets, the Company considered available positive and negative evidence giving greater weight to its recent cumulative losses and its ability to carryback losses against prior taxable income and lesser weight to its project ed financial results due to the challenges of forecasting future periods. The Company also considered, commensurate with its objective verifiability, the forecast of future taxable income including the reversal of temporary differences and the implementation of feasible and prudent tax planning strategies. At the end of the third quarter of 2009, changes in previously anticipated expectations necessitated a valuation allowance against the U.S. operations historical excess tax benefits to be recognized in that quarter since they were no longer more likely than not realizable. Under current tax laws, this valuation allowance will not limit the Company’s ability to utilize federal and state deferred tax assets provided it can generate sufficient future taxable income.

As of the end of the second quarter of 2010, there were no material changes to either the nature or the amounts of the uncertain tax positions previously determined and disclosed pursuant to FASB ASC Topic 740, at the end of 2009.

Note 8. Commitments and Contingencies
 
Warranty Obligations
 
The Company historically provided a standard one-year or two-year warranty coverage on its systems. Beginning in September 2009, the Company changed its warranty policy to a one-year standard warranty on all systems. Warranty coverage provided is for labor and parts necessary to repair the systems during the warranty period. The Company accounts for the estimated warranty cost of the standard warranty coverage as a charge to costs of revenue when revenue is recognized. The estimated warranty cost is based on historical product performance. To determine the estimated warranty reserve, the Company utilizes actual service records to calculate the average service expense per system and applies this to the equivalent number of units exposed under warranty. The Company updates these estimated charges every quarter.

The following table provides the changes in the product warranty accrual for the six months ended June 30, 2010 and 2009 (in thousands):

 
 
June 30,
 2010
   
June 30,
 2009
 
Beginning Balance
  $ 1,049     $ 1,916  
Add: Accruals for warranties issued during the period
    987       1,077  
Less: Settlements made during the period
    (1,308 )     (1,655 )
Ending Balance
  $ 728     $ 1,338  


Facility Leases
 
The Company leases its Brisbane, California, office and manufacturing facility under a non-cancelable operating lease which expires in 2013. In addition, the Company has leased office facilities in certain international countries, including: Japan, Switzerland, France, and Spain. As of June 30, 2010, the Company was committed to minimum lease payments for facilities and other leased assets under long-term non-cancelable operating leases as follows (in thousands):

Fiscal Year Ending December 31,
 
 
 
2010 (remainder)
 
$
897
 
2011
 
 
1,896
 
2012
 
 
1,806
 
2013
 
 
1,655
 
2014
 
 
6
 
Future minimum rental payments
 
$
6,260
 
 
Purchase Commitments
 
The Company maintains certain open inventory purchase commitments with its suppliers to ensure a smooth and continuous supply for key components. The Company’s liability in these purchase commitments is generally restricted to a forecasted time-horizon as agreed between the parties. These forecasted time-horizons can vary among different suppliers. The Company’s open inventory purchase commitments were not material at June 30, 2010.

2009 Restructuring Charges

In accordance with FASB ASC 420-10-50 and SAB Topic 5.P.4, the Company recognized a total of $976,000 in restructuring charges during the year ended December 31, 2009. These benefits were provided to then current employees that were involuntarily terminated under the terms of one-time benefit arrangements during the year. The Company implemented three reduction-in-force (RIF) programs in 2009: January 2009, May 2009 and August 2009. In general, the company-wide RIF programs specifically targeted positions that were directly impacted by the business slow down, such as sales, customer relations, manufacturing, and service. All employees terminated under these programs were notified within the quarter the severance and benefit expenses were recognized. The Company did not exit, dispose, terminate, or relocate any business activities and it d id not materially change either the scope of, or the manner in which it conducted business following the headcount reductions. The Company incurred severance and benefits expenses accrued under one-time benefit arrangements of $646,000 for the three months and $880,000 for the six months ended June 30, 2009, and the severance liability was $218,000 at June 30, 2009. There were no remaining obligations associated with the 2009 RIF at December 31, 2009.

Litigation
 
Two securities class action lawsuits were filed against the Company and two of the Company’s executive officers in April 2007 and May 2007, respectively, in the U.S. District Court for the Northern District of California following declines in the Company’s stock price. The plaintiffs claimed to represent purchasers of the Company’s common stock from January 31, 2007 through May 7, 2007. The complaints generally alleged that materially false statements and omissions were made regarding the Company’s financial prospects, and sought unspecified monetary damages. On November 1, 2007, the Court ordered the two cases consolidated. On December 17, 2007, the plaintiffs filed a consolidated, amended complaint, and on January 31, 2008, the Company filed a motion to dismiss that complaint. On September 30, 2008, in response t o the Company’s motion, the Court issued an order dismissing the plaintiffs’ amended complaint without prejudice. On October 28, 2008, the plaintiffs filed a Notice Of Intention Not to File A Second Amended Consolidated Complaint. On November 25, 2008, the Court closed the case on its own initiative. On November 26, 2008, the plaintiffs filed a Notice of Appeal to the U.S. Court of Appeals for the Ninth Circuit, on April 16, 2009 the plaintiffs filed their opening brief with that Court, on June 17, 2009 the Company filed its response to Plaintiff’s brief, on July 1, 2009 the plaintiffs filed their response to the Company’s brief, and on February 11, 2010 both parties presented oral argument to the Court of Appeals. On June 30, 2010, the U.S. Court of Appeals for the Ninth Circuit affirmed the District Court’s order dismissing the complaint.
 
A Telephone Consumer Protection Act, or TCPA, class action lawsuit was filed against the Company in January 2008 in the Illinois Circuit Court, Cook County, by Bridgeport Pain Control Center, Ltd., seeking monetary damages, injunctive relief, costs and other relief. The complaint alleged that the Company violated the TCPA by sending unsolicited advertisements by facsimile to the plaintiff and other recipients nationwide during the four-year period preceding the lawsuit without the prior express invitation or permission of the recipients. Two state law claims, limited to Illinois recipients, alleged a class period of three and five years, respectively. Under the TCPA, recipients of unsolicited facsimile advertisements may be entitled to damages of $500 per violation for inadvertent violations and $1,500 per violation for knowing or willful violations. On February 22, 2008, the Company removed the case to federal court in the Northern District of Illinois. On August 25, 2009, following negotiations between the parties, the parties entered into a settlement agreement that would resolve the case on a class-wide basis. On April 6, 2010, the Court gave its final approval for the settlement. Under the terms of the settlement, the Company paid a total of $950,000 in exchange for a full release of facsimile-related claims. The Company included $850,000 in its 2009 Condensed Consolidated Statements of Operations for the cost of the settlement, net of the estimated administrative expenses expected to be recoverable from its insurance carrier.


Other Legal Matters
 
In addition to the foregoing lawsuits, the Company is named from time to time as a party to product liability and contractual lawsuits in the normal course of its business. As of June 30, 2010, the Company was not a party to any material pending litigation other than those described above in the “Litigation” section.
 
Indemnifications
 
In the normal course of business, the Company enters into agreements that contain a variety of representations, warranties, and indemnification obligations. For example, the Company entered into indemnification agreements with each of its directors and executive officers. The Company’s exposure under its various indemnification obligations, including those under the indemnification agreements with its directors and executive officers, is unknown since indemnification obligations involve future claims that may be made against the Company. The Company has not accrued or paid any amounts for any such indemnification obligations to date.

Note 9.  Subsequent Events

Management evaluated all activity of the Company and concluded that no subsequent events have occurred that would require recognition in the Condensed Consolidated Financial Statements or disclosure in Notes to Condensed Consolidated Financial Statements as of June 30, 2010.


MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
 
Caution Regarding Forward-Looking Statements
 
The following discussion should be read in conjunction with the attached condensed consolidated financial statements and notes thereto, and with our audited consolidated financial statements and notes thereto for the fiscal year ended December 31, 2009 as contained in our annual report on Form 10-K filed with the SEC on March 15, 2010. This quarterly report, including the following sections, contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Throughout this report, and particularly in this Item 2, the forward-looking statements are based upon our current expectations, estimates and projections and reflect our beliefs and assumptions based upon information available to us at the date of this report. In some cases, you can identify these statements by words suc h as “may,” “might,” “will,” “should,” “expects,” “plans,” “anticipates,” “believes,” “estimates,” “predicts,” “potential” or “continue,” and other similar terms. These forward-looking statements are not guarantees of future performance and are subject to risks, uncertainties, and assumptions that are difficult to predict. Our actual results, performance or achievements could differ materially from those expressed or implied by the forward-looking statements. These forward-looking statements include, but are not limited to, statements relating to our future financial performance, the ability to grow our business, increase our revenue, manage expenses, generate additional cash, achieve and maintain profitability, develop and commercialize existing and new products and applications, and improve the performance of our worldwide sales and distribution network, and the ou tlook regarding long term prospects. These forward-looking statements involve risks and uncertainties. The cautionary statements set forth below and those contained in Part II, Item 1A – “Risk Factors” commencing on page 28, identify important factors that could cause actual results to differ materially from those predicted in any such forward-looking statements. We caution you to not place undue reliance on these forward-looking statements, which reflect management’s analysis and expectations only as of the date of this report. We undertake no obligation to update forward-looking statements to reflect events or circumstances occurring after the date of this Form 10-Q.
 
Introduction
 
The Management’s Discussion and Analysis, or MD&A, is organized as follows:
 
 
·
Executive Summary. This section provides a general description and history of our business, a brief discussion of our product lines and the opportunities, trends, challenges and risks we focus on in the operation of our business.

 
·
Critical Accounting Policies and Estimates. This section describes the key accounting policies that are affected by critical accounting estimates.

 
·
Recent Accounting Pronouncements. This section describes the issuance and effect of new accounting pronouncements that may be applicable to us.

 
·
Results of Operations. This section provides our analysis and outlook for the significant line items on our Consolidated Statements of Operations.

 
·
Liquidity and Capital Resources. This section provides an analysis of our liquidity and cash flows, as well as a discussion of our commitments that existed as of June 30, 2010.

Executive Summary
 
Company Description. We are a global medical device company engaged in the design, development, manufacture, marketing and servicing of laser and other light-based aesthetics systems for practitioners worldwide. We offer aesthetic systems on three platforms—Xeo, CoolGlide, and Solera— for use by physicians and other qualified practitioners to allow our customers to offer safe and effective aesthetic treatments to their customers. . The Xeo and Solera platforms offer multiple hand pieces and applications, which allow customers to upgrade their systems (Upgrades revenue). In addition to systems and upgrades revenue, we generate revenue from the sale of extended warranty contracts, labor and materials for products that are out of warranty, Titan hand piec e refills, and the distribution of third party dermal filler and cosmeceuticals in Japan.

Our corporate headquarters and U.S. operations are located in Brisbane, California, from where we conduct our manufacturing, warehousing, research and development, regulatory, sales and marketing, service, and administrative activities. In the United States, we market, sell and service our products primarily through direct sales and service employees and through a distribution relationship with PSS World Medical Shared Services, Inc., a wholly owned subsidiary of PSS World Medical, or PSS, which has over 700 sales representatives serving physician offices throughout the United States. In addition, we also sell certain items, like Titan hand piece refills and marketing brochures, through the internet.
 
International sales are generally made through direct sales employees and through a worldwide distributor network in over 30 countries. Outside the United States, we have a direct sales presence in Australia, Canada, France, Japan, Spain, Switzerland and the United Kingdom.


Products. Our revenue is derived from the sale of Products, Upgrades, Service, Titan hand piece refills, and dermal fillers and cosmeceuticals. Product revenue represents the sale of a system platform, which consists of a console that incorporates a universal graphic user interface, a laser and/or other light-based module, control system software and high voltage electronics, and one or more hand pieces. However, depending on the application, the laser or other light-based module is sometimes contained in the hand piece, such as with our Pearl and Pearl Fractional applications, instead of in the console. We offer our customers the ability to select the system that best fits their practice at the time of purchase and then to cost-effectively add applications to the ir system as their practice grows. This enables customers to upgrade their systems whenever they want and provides us with a source of recurring revenue, which we classify as Upgrades revenue. Service revenue includes extended warranty contracts and services on out-of-warranty products, which is comprised of labor and material. Revenues from extended warranty contracts are deferred and amortized over the lives of the associated contracts and services are recognized at the time the services are provided. Titan hand piece refill revenue is associated with our Titan hand piece which requires replacement of the optical source after a set number of pulses has been used.

In addition, we have distribution agreements with BioForm, Inc. (BioForm) to distribute its Radiesse® dermal filler product in Japan, and with Obagi Medical Products, Inc. (Obagi) to distribute its cosmeceuticals, or skin care products, in Japan. In addition, we offer Obagi products as part of an introductory promotion program pursued by us and Obagi in the U.S. and Canadian markets. Revenue from these arrangements is shown under the category of Dermal filler and cosmeceuticals. We also have a distribution agreement with Sound Surgical Technologies, LLC (SST) to distribute its VASER® Lipo System in certain European countries and Canada. Revenue from the sale of this product will be included in Product revenue.
 
Significant Business Trends. We believe that our ability to grow revenue will be primarily dependent on the following:
 
 
·
Continuing to expand our product offerings.
 
 
·
Investments made in our global sales and marketing infrastructure.
 
 
·
Use of clinical results to support new aesthetic products and applications.
 
 
·
Enhanced luminary development and reference selling efforts (to develop a location where our products can be displayed and used to assist in selling efforts).
 
 
·
Customer demand for our products and consumer demand for the applications they offer.

 
·
Marketing to physicians in the core dermatology and plastic surgeon specialties, as well as outside those specialties.

 
·
Generating Service, Upgrade, Titan hand piece refill, and Dermal filler and cosmeceuticals revenue from our growing installed base of customers.
 
U.S. Revenue
Our U.S. revenue increased by 5% in the three months ended June 30, 2010, compared to the same period in 2009. However, our U.S. revenue decreased 14% in the six months ended June 30, 2010, compared to the same period in 2009. We believe this decrease is, in part, due to:

 
·
Many of our current and prospective customers that do not have established medical offices continuing to be reluctant to purchase capital equipment. In times of general economic uncertainty and tight credit, individuals often reduce or delay their capital equipment purchase decisions.

 
·
There continues to be a lack of availability of consumer credit for some of our customers that do not have established medical offices, e.g. Med - Spas, which is contributing to reduced volume.

 
·
Lower average selling price (ASP), which is resulting from our customers purchasing fewer applications and lower pricing for certain of our premium applications to address competitive pressures.
 
Voluntary Titan XL Recall
In the first-half of 2010, we initiated a voluntary recall of our Titan XL hand piece. As a result of this voluntary recall, our Titan hand piece refill revenue decreased 32% in the three months, and 18% in the six months, ended June 30, 2010, compared to the same periods in 2009. As part of the voluntary recall program, we provided our customers with a fully “refilled” Titan XL hand piece and therefore our Titan refill sales were lower compared to the same periods in 2009. Further, in our results of operations, we recorded an expense of $62,000 for the three months and $487,000 for the six months ended June 30, 2010, for the estimated cost of this voluntary recall. These factors adversely affected our gross margin for the three and six months ended June 30, 2010, compared to the same periods in 2009.


2009 Reduction in Force
In 2009, in response to the economic environment and our reduced revenue in 2008 and 2009, we reduced our company-wide workforce by approximately 18% and implemented other cost-reduction measures in the first-half of 2009. The headcount reductions impacted all departments and functions and resulted in restructuring charges of approximately $880,000 in the first-half of 2009. As a result of these cost-reduction measures, our operating expenses declined in the six months ended June 30, 2010, compared to the same period in 2009.

Factors that May Impact Future Performance.
 
Our industry is impacted by numerous competitive, regulatory and other significant factors. Our industry is highly competitive and our future performance depends on our ability to compete successfully. Additionally, our future performance is dependent upon our ability to continue to expand our product offerings, develop innovative technologies, obtain regulatory clearances for our products, protect the proprietary technology of our products and our manufacturing processes, manufacture our products cost-effectively, and successfully market and distribute our products in a profitable manner. If we fail to execute on the aforementioned initiatives, our business would be adversely affected. A detailed discussion of these and other factors that could impact our future performance are provided in Part II, Item 1A “Risk Factors” sect ion below.
 
Critical Accounting Policies and Estimates.
 
The preparation of our Condensed Consolidated Financial Statements and related disclosures in conformity with generally accepted accounting principles in the United States, or GAAP, requires us to make estimates, judgments and assumptions that affect the reported amounts of assets, liabilities, revenue and expenses. These estimates, judgments and assumptions are based on historical experience and on various other factors that we believe are reasonable under the circumstances. We periodically review our estimates and make adjustments when facts and circumstances dictate. To the extent that there are material differences between these estimates and actual results, our financial condition or results of operations will be affected.
 
Critical accounting estimates, as defined by the Securities and Exchange Commission (SEC), are those that are most important to the portrayal of our financial condition and results of operations and require our management’s most difficult and subjective judgments and estimates of matters that are inherently uncertain. The accounting policies and estimates that we consider to be critical, subjective, and requiring judgment in their application are summarized in “Item 7—Management’s Discussion and Analysis of Financial Condition and Results of Operations” in our Annual Report on Form 10-K for the year ended December 31, 2009 filed with SEC on March 15, 2010. There have been no significant changes to the accounting policies and estimates disclosed in our Form 10-K, except for our Titan XL voluntary recall progra m.

Titan XL Voluntary Recall

In the first-half 2010, we initiated a voluntary recall of our global installed base of Titan XL hand pieces to replace certain components. We estimated the cost of the Titan XL voluntary recall to be $487,000 based on the direct costs of replacing certain components of the estimated number of hand pieces to be replaced. At June 30, 2010, our remaining accrual balance was $182,000.

Recent Accounting Pronouncements

For a full description of recent accounting updates, including the respective expected dates of adoption and effects on results of operations and financial condition see Note 1 “Summary of Significant Accounting Policies – Recent Accounting Updates” in the Notes to Condensed Consolidated Financial Statements in Part I, Item 1 of this Form 10-Q”.


Results of Operations
 
The following table sets forth selected consolidated financial data for the periods indicated, expressed as a percentage of net total revenue.

   
Three Months Ended
June 30,
   
Six Months Ended
June 30,
 
   
2010
   
2009
   
2010
   
2009
 
Operating Ratio:
                       
Net revenue
   
100%
     
100%
     
100%
     
100%
 
Cost of revenue
   
44%
     
44%
     
43%
     
42%
 
Gross profit
   
56%
     
56%
     
57%
     
58%
 
                                 
Operating expenses:
                               
Sales and marketing
   
53%
     
52%
     
49%
     
50%
 
Research and development
   
12%
     
13%
     
11%
     
12%
 
General and administrative
   
22%
     
31%
     
19%
     
24%
 
Litigation settlement
   
—%
   
—%
     
—%
     
3%
 
Total operating expenses
   
87%
     
96%
     
79%
     
89%
 
                                 
Loss from operations
   
(31)%
     
(40)%
     
(22)%
     
(31)%
 
Interest and other income, net
   
1%
     
5%
     
1%
     
4%
 
Loss before income taxes
   
(30)%
     
(35)%
     
(21)%
     
(27)%
 
Provision (benefit) for income taxes
   
1%
     
(15)%
     
1%
     
(11)%
 
Net loss
   
(31)%
     
(20)%
     
(22)%
     
(16)%
 
 

Percentages in this table and throughout our discussion and analysis of financial condition and results of operations may reflect rounding adjustments.

Net Revenue

 
 
Three Months Ended June 30,
   
Six Months Ended June 30,
 
(Dollars in thousands)
 
2010
   
% Change
   
2009
   
2010
   
% Change
   
2009
 
Revenue mix by geography:
 
 
   
 
   
 
   
 
   
 
   
 
 
United States
  $ 4,784       5 %   $ 4,551     $ 9,331       (14 )%   $ 10,896  
International
    7,433       4 %     7,114       16,635       9 %     15,199  
Consolidated total revenue
  $ 12,217       5 %   $ 11,665     $ 25,966       %   $ 26,095  
 
                                               
United States as a percentage of total revenue
    39 %             39 %     36 %             42 %
International as a percentage of total revenue
    61 %             61 %     64 %             58 %
Revenue mix by product category:
                                               
Products (1)
  $ 5,676       10 %   $ 5,142     $ 13,121       3 %   $ 12,794  
Upgrades
    1,338       11 %     1,201       2,541       (14 )%     2,955  
Service
    3,437       1 %     3,397       6,751       2 %     6,650  
Titan hand piece refills
    960       (32 )%     1,403       2,282       (18 )%     2,788  
Dermal fillers and cosmeceuticals (1)
    806       54 %     522       1,271       40 %     908  
Consolidated total revenue
  $ 12,217       5 %   $ 11,665     $ 25,966       %   $ 26,095  
 

(1)
Beginning in 2010, we classified revenue from sales of BioForm’s Radiesse® dermal filler product in Japan and sales of Obagi’s cosmeceuticals product in the revenue category ‘Dermal filler and cosmeceuticals.’ Previously, we classified these sales in the revenue category ‘Products.’ As such, we reclassified the 2009 revenue from BioForm’s Radiesse® dermal filler product sales in Japan and Obagi cosmeceuticals product sales from ‘Products’ to ‘Dermal filler and cosmeceuticals.’

Products Revenue

As explained in more detail in the Products section of the Executive Summary above, our Products consist of configurable system platform that includes a console and one or more hand pieces. Each Product is configured to give our customers the ability to select the combination of platform and hand pieces that provides the applications that best fit their practice.

Products revenue increased 10% in the three months, and 3% for the six months, ended June 30, 2010, compared to the same periods in 2009. The increase in the three-month period was due primarily to a higher number of systems sold, albeit at a lower weighted average selling price (ASP). The increase in the six-month period was due primarily to a higher number of systems sold internationally; partially offset by a lower number of systems sold in the U.S., but in both geographies at lower weighted ASPs.  The lower weighted ASPs resulted primarily from a combination of the following factors ─ that are not stated in order of magnitude as we are not able to separately quantify the impacts of each of these factors due to the custom system configuration of the units sold:


 
·
customers purchasing fewer applications;

 
·
our Products weighted ASPs were negatively affected by competitive pricing pressures in the marketplace; and

 
·
our international Products’ weighted ASPs were negatively affected by a higher percentage of revenue from distributors, which have a lower weighted ASP than our direct revenue.

Upgrades Revenue

As explained in more detail in the Products section of the Executive Summary above, our configurable system platforms allow customers to add applications to their existing systems to meet the changing needs of their practices. In some cases, when certain applications are desired that are only available on a platform other than the one owned by the customer, the upgrades revenue will include a platform exchange and additional hand pieces.

Upgrades revenue increased 11% in the three months ended June 30, 2010, compared to the same period in 2009. This increase was due primarily to an increase in platform upgrade revenue. Hand piece upgrade revenue remained relatively flat as an increase in hand piece upgrade unit sales were offset by a decrease in the hand pieces weighted ASPs. The decrease in hand piece weighted ASP resulted primarily from an unfavorable mix of applications due to fewer Pearl and Pearl fractional ─ our premium priced upgrade products ─ upgrades being sold during the three months ended June 30, 2010, compared to the same period in 2009.

Upgrades revenue decreased 14% in the six months ended June 30, 2010, compared to the same period in 2009. This decrease was due primarily to a decrease in hand piece weighted ASPs, resulting primarily from an unfavorable mix of applications due to fewer Pearl and Pearl fractional ─ our premium priced upgrade products ─ upgrades being sold during the three months ended June 30, 2010, compared to the same period in 2009. The lower ASPs were partially offset by an increase in hand piece upgrade unit sales.

Service Revenue

Our service revenue slightly increased by 1% in the three months and 2% in the six months ended June 30, 2010, compared to the same periods in 2009. This revenue has remained flat over the past several quarters due primarily to higher service contract revenue, offset by lower extended warranty contract amortization, as a result of lower ASP’s on our extended warranty contracts.

Titan Hand Piece Refill Revenue

Our Titan hand piece refill revenue decreased 32% in the three months and 18% in the six months ended June 2010, compared to the same periods in 2009. These decreases were due primarily to our voluntary recall of our Titan XL hand piece in the first-half of 2010, in which we provided our eligible customers with a fully “refilled” Titan XL hand piece.

Dermal Filler and Cosmeceuticals Revenue

Our dermal fillers and cosmeceuticals revenue increased 54% in three months, and 40% in the six months, ended June 30, 2010, compared to the same periods in 2009. These increases were due primarily to the commencement of the sale of Obagi products in Japan in February 2010.

Total U.S. Revenue

U.S revenue increased 5% in the three months ended June 30, 2010, compared to the same period in 2009. This increase was due primarily to an increase of in Products and Upgrades revenue of 28%, partially offset by lower Titan hand piece refill revenue of 37%, due primarily to the voluntary recall of our Titan XL hand piece in the first-half of 2010, in which we provided our customers with a fully “refilled” Titan XL hand piece.

U.S revenue decreased 14% in the six months ended June 30, 2010, compared to the same period in 2009. This decrease was due primarily to a decrease in Products and Upgrades revenue of 20% and, to a lesser extent, lower Titan hand piece refill revenue of 22%, due primarily to the voluntary recall of our Titan XL hand piece in the first-half of 2010, in which we provided our customers with a fully “refilled” Titan XL hand piece.

Total International Revenue

International revenue increased 4% in the three months ended June 30, 2010, compared to the same period in 2009. This increase was due primarily to:

 
·
an increase in Japan Products and cosmeceuticals revenue of 116%; partially offset by


 
·
a decrease in Australia Products revenue of 55%; and

 
·
a decrease in international Titan hand piece refill revenue of 29%, due primarily to the voluntary recall of our Titan XL hand piece in the first-half of 2010, in which we provided our customers with a fully “refilled” Titan XL hand piece.

International revenue increased 9% in the six months ended June 30, 2010, compared to the same period in 2009. This increase was due primarily to:

 
·
an increase in Japan Products and cosmeceuticals revenue of  56%; and

 
·
an increase in Canada Products revenue of 343%; partially offset by

 
·
a decrease in Europe Products revenue of 47%; and

 
·
a decrease in international Titan hand piece refill revenue of 16%, due primarily to the voluntary recall of our Titan XL hand piece in the first-half of 2010, in which we provided our customers with a fully “refilled” Titan XL hand piece.

For discussion of revenue by product category see discussion above.
 
Gross Profit

 
Three Months Ended June 30,
 
Six Months Ended June 30,
 
(Dollars in thousands)
2010
   
% Change
 
2009
 
2010
   
% Change
 
2009
 
Gross profit
  $ 6,882       5 %   $ 6,535     $ 14,802       (2 )%   $ 15,029  
As a percentage of net revenue
    56 %             56 %     57 %             58 %
 
Our cost of revenue consists primarily of material, personnel expenses, royalty expense, warranty and manufacturing overhead expenses.

Gross profit as a percent of net revenue (gross margin) remained flat at 56% for both the three months ended June 30, 2010 and 2009, due primarily to a decrease in service related expenses resulting from reduced material costs, offset by an unfavorable product mix resulting from increased sales of our lower margin products, such as cosmeceuticals, and the $62,000 expense associated with our voluntary Titan XL recall program.

Gross margin was 57% for the six months ended June 30, 2010, compared to 58% for the same period in 2009. This decrease in gross margin was due primarily to an unfavorable product mix resulting from increased sales of our lower margin products, such as cosmeceuticals, and the $487,000 expense associated with our voluntary Titan XL recall program; partly offset  by an increase in margins related to reduced service related expenses resulting from reduced material costs.

Sales and Marketing
 
 
Three Months Ended June 30,
 
Six Months Ended June 30,
 
(Dollars in thousands)
2010
   
% Change
 
2009
 
2010
   
% Change
 
2009
 
Sales and marketing
  $ 6,452       6 %   $ 6,071     $ 12,813       (2 )%   $ 13,074  
As a percentage of total revenue
    53 %             52 %     49 %             50 %
 
Sales and marketing expenses consist primarily of personnel expenses, expenses associated with customer-attended workshops and trade shows, post-marketing studies, and advertising.

Sales and marketing expenses increased $381,000 in the three ended June 30, 2010, compared to the same period in 2009. This increase was due primarily to:
 
 
·
expenses of $281,000 related to the creation of three new departments in the first quarter of 2010: post marketing studies (clinical development), business development and telesales;
 
 
·
an increase in advertising and printing expenses of $125,000; and
 
 
·
an increase in travel and related expenses of $108,000, mainly from our international sales force; partially offset by

 
·
lower personnel expenses of $136,000 in the U.S. and internationally, with the exception of Japan, due primarily to lower sales commission expenses resulting from lower revenue, and to lower sales headcount, resulting from our 2009 restructuring efforts.  Personnel expense in Japan increased as we hired additional sales representative and established an administrative infrastructure to sell Obagi cosmeceuticals.


Sales and marketing expenses decreased $261,000 in the six months ended June 30, 2010, compared to the same period in 2009. This decrease was mainly due to:
 
 
·
a decrease in personnel expenses of $532,000, due primarily to lower sales headcount, resulting from our 2009 restructuring efforts, and lower sales commission expenses resulting from lower revenue;

 
·
a decrease in sales of demonstration equipment expense of $212,000, due primarily to lower sales headcount, fewer workshops and fewer trade shows;

 
·
a decrease in customer-attended workshops and trade show expenses of $189,000, due primarily to fewer workshops as a result of lower sales headcount and due to cost cutting measures for trade shows;

 
·
a decrease in expenses related to our annual sales meeting of $186,000, which reflects fewer sales professionals attending the meeting (due to the reduction in headcount) and reduced third party expenses associated with the meeting; partially offset by

 
·
expenses of $541,000 related to the creation of three new departments in the first quarter of 2010: clinical development (post marketing studies), business development and telesales;
 
 
·
an increase in advertising and printing expenses of $209,000; and

 
·
an increase in travel and related expenses of $121,000, mainly from our international sales force.

Sales and marketing expenses, as a percentage of net revenue, increased to 53% for the three months ended June 30, 2010, compared to 52% for the same period in 2009. This increase in expenses as a percentage of net revenue was due primarily to higher expense partially offset by higher revenue in the three months ended June 30, 2010, compared to the same period in 2009. Sales and marketing expenses, as a percentage of net revenue, decreased to 49% for the six months ended June 30, 2010, compared to 50% for the same period in 2009. This decrease in expenses as a percentage of net revenue was due primarily to higher revenue coupled with lower expense in the six months ended June 30, 2010, compared to the same period in 2009.

Research and Development (R&D)

 
Three Months Ended June 30,
 
Six Months Ended June 30,
 
(Dollars in thousands)
2010
   
% Change
 
2009
 
2010
   
% Change
 
2009
 
Research and development
  $ 1,506       1 %   $ 1,495     $ 2,960       (9 ) %   $ 3,238  
As a percentage of total revenue
    12 %             13 %     11 %             12 %

R&D expenses consist primarily of personnel expenses, clinical research, regulatory and material costs.

R&D expenses slightly increased by $11,000 in the three months ended June 30, 2010, compared to the same period in 2009. This decrease was due primarily to:

 
·
a net increase in personnel expenses and consulting services of $76,000, resulting mainly from an increase in headcount in the second quarter of 2010; partially offset by
 
 
·
a decrease in prototype equipment expenses in clinical research of $56,000 and lower material costs of $30,000 reflecting R&D efforts for our TruSculpt product during the first-half of 2009 that was not replicated in the first-half of 2010.
 
R&D expenses decreased by $278,000 for the six months ended June 30, 2010, compared to the same period in 2009. This decrease was due primarily to lower material spending of $125,000 and lower prototype equipment expense in clinical research of $67,000 reflecting R&D efforts for our TruSculpt product during the first-half of 2009, that was not replicated in the first-half of 2010.
 
R&D expenses, as a percentage of net revenue, decreased to 12% for the three months ended June 30, 2010, compared to 13% for the same period in 2009. This decrease in expenses as a percentage of net revenue was due primarily to higher revenue in the three months ended June 30, 2010, compared to the same period in 2009. R&D expenses, as a percentage of net revenue, decreased to 11% for the six months ended June 30, 2010, compared to 12% for the same period in 2009. This decrease in expenses as a percentage of net revenue was due primarily to higher revenue coupled with lower expense in the six months ended June 30, 2010, compared to the same period in 2009.


General and Administrative (G&A)

 
 
Three Months Ended June 30,
 
 
Six Months Ended June 30,
 
(Dollars in thousands)
 
2010
 
% Change
 
2009
 
 
2010
 
% Change
 
2009
 
General and Administrative
 
$
2,744
 
(24)%
 
$
3,616
 
 
$
4,986
 
(19)%
 
$
6,136
 
As a percentage of total revenue
 
 
22%
 
 
 
 
31%
 
 
 
19%
 
 
 
 
24%
 
 
General and administrative expenses consist primarily of personnel expenses, legal fees, accounting, audit and tax consulting fees, and other general and administrative expenses. G&A expenses decreased $872,000 in the three months and $1,150,000 in the six months ended June 30, 2010, compared to the same periods in 2009. These decreases were primarily due to:
 
 
·
a decrease in bad debt expense of $555,000 in the three months ended and $627,000 in the six months ended June 30, 2010, compared to the same periods in 2009, resulting primarily from one leasing company that defaulted on its payment to us;
 
 
·
a decrease in professional services fee expenses of $127,000 in the three months ended and $380,000 in the six months ended June 30, 2010, compared to the same periods in 2009, resulting from reduced accounting and legal services; and

 
·
a decrease in personnel expenses of $84,000 in the three months ended and $141,000 in the six months ended June 30, 2010, compared to the same periods in 2009, due to reduced headcount, due to our 2009 restructuring efforts.

G&A expenses, as a percentage of net revenue, decreased to 22% for the three months ended June 30, 2010, compared to 31% for the same period in 2009, and decreased to 19% for the six months ended June 30, 2010, compared to 24% for the same period in 2009. These decreases in expenses as a percentage of net revenue were due primarily to lower expenses coupled with higher revenue in the three and six months ended June 30, 2010, compared to the same periods in 2009.
 
Litigation Settlement

We were a defendant in a Telephone Consumer Protection Act class action lawsuit. See Part I, Item I – Financial Statements above. We included $850,000 in our Condensed Consolidated Statement of Operations for the six months ended June 30, 2009 for the estimated cost of the settlement, net of administrative expenses and amounts that were recovered from our insurance carrier.
 
Interest and Other Income, Net
 
Interest and other income, net consist of the following:
 
 
Three Months Ended June 30,
 
Six Months Ended June 30,
 
(Dollars in thousands)
2010
   
% Change
 
2009
 
2010
   
% Change
 
2009
 
Interest income
  $ 123       (67 )%   $ 376     $ 303       (65 )%   $ 860  
Other income, net
    18       (87 )%     135       4       (98 )%     250  
Total Interest and other income, net
  $ 141       (72 )%   $ 511     $ 307       (72 )%   $ 1,110  
 
Interest and other income, net decreased by $370,000 for the three months and $803,000 for the six months ended June 30, 2010, compared to the same periods in 2009. These decreases were the result of:

 
·
A decrease in interest income of $253,000 in the three months and $557,000 in the six months ended June 30, 2010, compared to the same periods in 2009. These decreases were due primarily to reduced tax-exempt interest yields as a result of the Federal Reserve cutting interest rates; and

 
·
A decrease in other income of $117,000 in the three months and $246,000 in the six months ended June 30, 2010, compared to the same periods in 2009. These decreases were due mainly to net foreign exchange losses resulting primarily from translation losses that arose from the appreciation of the U.S. dollar relative to the currencies of our foreign subsidiaries in 2010, compared to foreign exchange gains resulting primarily from translation gains that arose from the devaluation of the U.S. dollar relative to the currencies of our foreign subsidiaries in 2009.
 
Provision (Benefit) for Income Taxes

 
Three Months Ended June 30,
 
Six Months Ended June 30,
 
(Dollars in thousands)
2010
 
% Change
 
2009
 
2010
 
% Change
 
2009
 
Loss before income taxes
  $ (3,679 )   $ (11 )%   $ (4,136 )   $ (5,650 )   $ (21 )%   $ (7,159 )
Provision (benefit) for income taxes
    82    
NA
      (1,772 )     129    
NA
      (2,967 )
Effective tax rate
    (2 )%             43 %     (2 )%             41 %


We recorded an income tax provision of $82,000 for the three months and $129,000 for the six months ended June 30, 2010 and a benefit of $1.8 million for the three months and $3.0 million for the six months ended June 30, 2009. Our income tax provision for the three and six months ended June 30, 2010 is primarily related to income taxes of our non-U.S. operations. Our income tax benefit for the three and six months ended June 30, 2009 reflects applicable United States federal and state income tax and the tax impact of non-U.S. operations, reduced primarily by tax exempt interest income and research and development (R&D) tax credit.

In the quarter ended September 30, 2009, we recorded a valuation allowance against our U.S. deferred tax assets as we determined that it was more likely than not that some of the deferred tax assets will not be realized. We anticipate we will continue to record a valuation allowance against the losses of certain jurisdictions, primarily federal and state, until such time as we are able to determine it is more likely than not the deferred tax asset will be realized. Such position is dependent on whether there will be sufficient future taxable income to realize such deferred tax assets.  We expect our future tax provisions, during the time such valuation allowances are recorded, will consist primarily of the tax expense of our non-U.S. jurisdictions that are profitable.
 
Net Loss per Diluted Share

 
 
Three Months Ended June 30,
   
Six Months Ended June 30,
 
(Dollars in thousands)
 
2010
 
% Change
   
2009
   
2010
 
% Change
   
2009
 
Net loss
  $ (3,761 )     59 %   $ (2,364 )   $ (5,779 )     38 %   $ (4,192 )
Net loss per diluted share
  $ (0.28 )     56 %   $ (0.18 )   $ (0.43 )     34 %   $ (0.32 )

Loss before income taxes increased $1.4 million, or 59%, in the three months and $1.6 million, or 38%, in the six months ended June 30, 2010, compared to the same periods in 2009. The increase is due primarily to:

 
·
a decrease in tax benefits of $1.9 million in the three months and $3.1 million in the six months ended June 30, 2010;

 
·
a decrease in interest and other income of $370,000 in the three months and $803,000 in the six months ended June 30, 2010; and

 
·
a charge recorded for the voluntary recall of our Titan XL hand piece of $62,000 in the three months and $487,000 in the six months ended June 30, 2010; partially offset by:

 
·
a decrease in operating expenses of $480,000 in the three months and $2.5 million in the six months ended June 30, 2010, due primarily to our 2009 restructuring efforts; and

 
·
― just affecting the six month comparison ― litigation settlement expense of $850,000 recognized in the first quarter of 2009.

Liquidity and Capital Resources
 
Liquidity is the measurement of our ability to meet potential cash requirements, fund the planned expansion of our operations and acquire businesses. Our sources of cash include operations and stock option exercises. We actively manage our cash usage and investment of liquid cash to ensure the maintenance of sufficient funds to meet our daily needs. The majority of our cash and investments are held in U.S. banks and our foreign subsidiaries maintain a limited amount of cash in their local banks to cover their short-term operating expenses.

Liquidity Ratios

   
June 30,
2010
   
December 31,
2009
 
Working Capital
  $ 92,683     $ 96,015  
Current Ratio
 
8.0:1
   
6.9:1
 

Cash and Cash Equivalents, Marketable Investments and Long-Term Investments Summary
 
The following table summarizes our cash and cash equivalents, marketable investments and long-term investments (in thousands):

 
 
June 30,
2010
 
 
December 31,
2009
 
 
Change
 
Cash and cash equivalents
 
$
31,697
 
 
$
22,829
 
 
$
8,868
 
Marketable investments
 
 
60,317
 
 
 
76,780
 
 
 
(16,463
)
Long-term investments
 
 
7,115
 
 
 
7,275
 
 
 
(160
)
Total
 
$
99,129
 
 
$
106,884
 
 
$
(7,755
)


Cash Flows

 
 
Six Months Ended June 30,
 
(Dollars in thousands)
 
2010
 
 
2009
 
Net cash flow provided by (used in):
 
 
 
 
 
 
 
 
Operating activities
 
$
(6,620
)
 
$
(2,989
)
Investing activities
 
 
15,135
 
 
 
1,615
 
Financing activities
 
 
353
 
 
 
279
 
Net increase (decrease) in cash and cash equivalents
 
$
8,868
 
 
$
(1,095
)
 
Cash Flows from Operating Activities
 
Net cash used in operating activities in the six months ended June 30, 2010 was $6.6 million, which was attributable primarily to:
 
 
·
$2.7 million used by the net loss of $5.8 million after adjusting for non-cash related items of $3.0 million; consisting primarily of stock-based compensation expense of $2.6 million and other items of $451,000;

 
·
$3.2 million used to pay down the higher 2009 year-end accrued liabilities relating primarily to: (i) a reduction of professional and legal fees of $1.3 million resulting primarily from a settlement payment of $950,000 relating to our TCPA litigation matter (see Part II, Item 1 – Legal Proceedings) and $366,000 related primarily to payment of other legal settlements, (ii) reduction of customer deposits by $485,000 resulting from converting customer prepayments to revenue, (iii) personnel expenses of $390,000 resulting primarily from the pay-down of year-end commissions and bonuses, (iv) reduction of the sales, use and value added taxes payable balance by $326,000 due to lower international revenue, (v) reduction of accrued warranty expenses of $321,000 due primarily to fewer units remaining under warranty, and a (vi) net reduction of $252,000 for accrued sales and marketing expenses;

 
·
$857,000 used as a result of a decrease in deferred revenue due primarily to a decrease in unit sales volume of Products and Upgrades that included purchases of extended service contracts, a reduction in our service contract pricing, a shift by customers towards purchasing shorter term contracts, and fewer customers purchasing extended service contracts; and

 
·
$633,000 cash used primarily to purchase inventory pursuant to our distribution agreements with Obagi and BioForm; partially offset by

 
·
$1.2 million decrease in accrued interest and unamortized discounts related to our marketable and long-term investments.
 
Net cash used in operating activities in the six months ended June 30, 2009 was $3.0 million, which was attributable primarily to:
 
 
·
$158,000 used by the net loss of $4.2 million after adjusting for non-cash related items of $4.0 million- consisting primarily of stock-based compensation expense of $2.5 million, net increase in the allowance for doubtful accounts of $553,000 due primarily to one leasing company that has defaulted on its payment to us and a $503,000 increase in the provision for excess and obsolete inventories resulting from the reduction in future demand for our products;

 
·
$2.0 million used as a result of a decrease in deferred revenue due primarily to a decrease in unit sales volume of Products and Upgrades that included purchases of extended service contracts, a reduction in our service contract pricing, and a shift by customers towards purchasing shorter term contracts;

 
·
$2.1 million used to increase other current assets and prepaid expenses, relating primarily to a $3.0 million increase in income tax receivable, offset by other net decreases of $930,000;

 
·
$1.1 million used to pay down the higher 2008 year-end accrued liabilities relating primarily to: (i) lower accrued personnel expenses of $912,000 due primarily to reduced accruals for commissions and employee benefit expenses; (ii) reduction of accrued warranty expenses of $578,000 due primarily to fewer units remaining under warranty, (iii) reduction of the income taxes payable balance by $285,000, and (iv) net reduction of $281,000 of accrued royalties due to the reduced revenue in the second quarter of 2009. This was partially offset by higher accrued settlement expense of $850,000 relating to our TCPA litigation matter (see Part II, Item 1 – Legal Proceedings);

 
·
Partially offset by $2.4 million of cash generated by the decrease in gross accounts receivable balance from December 31, 2008 to June 30, 2009 that resulted from the collection of the higher 2008 year-end accounts receivable balances.


Cash Flows from Investing Activities
 
We generated net cash of $15.1 million from investing activities in the six months ended June 30, 2010, which was attributable primarily to:
 
 
·
$49.0 million in net proceeds from the sales and maturities of marketable investments; partially offset by

 
·
$33.7 million of cash used to purchase marketable investments.

We generated net cash of $1.6 million from investing activities in the six months ended June 30, 2009, which was attributable primarily to:
 
 
·
$18.6 million in net proceeds from the sales and maturities of marketable investments; partially offset by

 
·
$16.9 million of cash used to purchase marketable investments.
 
Cash Flows from Financing Activities
 
Net cash provided by financing activities was $353,000 in the six months ended June 30, 2010 and $279,000 in the six months ended June 30, 2009, which resulted from cash generated by the issuance of stock through our stock option and employee stock purchase plan.
 
Adequacy of cash resources to meet future needs
 
We had cash, cash equivalents, marketable investments, and long-term investments of $99.1 million as of June 30, 2010. Of this amount, we had $7.1 million invested in student loan auction rate securities (ARS), which are classified as long-term assets. For the first six months of 2010, we financed our operations through the sales and maturities of marketable investments, and cash from interest income. We believe the existing capital resources, including cash and cash equivalents and marketable investments of $92.0 million, are sufficient to meet our operating and capital requirements for the foreseeable future. Except for the recent trend of cash used to fund our operating activities, we are unaware of any other known trends or any known demands, commitments, events or uncertainties, including collecta bility of our accounts receivable, that will result in, or that are reasonably likely to result in, liquidity increasing or decreasing in any material way.

Off-Balance Sheet Arrangements
 
We do not participate in transactions that generate relationships with unconsolidated entities or financial partnerships, such as entities often referred to as structured finance, variable interest or special purpose entities, which would have been established for the purpose of facilitating off-balance sheet arrangements or other contractually narrow or limited purposes.
 
We have certain contractual arrangements that create potential risk for us and are not recognized in our Condensed Consolidated Balance Sheets. Discussed below are off-balance sheet arrangements that have or are reasonably likely to have a material current or future effect on our financial condition, changes in financial condition, revenue or expenses, results of operations, liquidity, capital expenditures, or capital resources.
 
We lease various real properties under operating leases that generally require us to pay taxes, insurance, maintenance, and minimum lease payments. Some of our leases have options to renew.

Commitments and Contingencies

The Company maintains certain open inventory purchase commitments with its suppliers to ensure a smooth and continuous supply for key components. The Company’s liability in these purchase commitments is generally restricted to a forecasted time-horizon as agreed between the parties. These forecasted time-horizons can vary among different suppliers. The Company’s open inventory purchase commitments were not material at June 30, 2010.

We are party to various legal proceedings. See Note 8, “Commitments and Contingencies,” in the Notes to Condensed Consolidated Financial Statements in Part I, Item 1 of this Quarterly Report on Form 10-Q for more information.

We initiated a voluntary recall of our global installed base of Titan XL hand pieces starting May 2010. Though we continue to actively attempt to reach all customers through various communications notifying them of the voluntary recall, we may not be able to replace all our hand pieces before a patient of our customer is injured. If we are not able to completely replace all Titan XL hand pieces and there is a defective hand piece that results in an injury, or if there are patients injured due to the malfunctioning of one of our voluntarily recalled Titan XL hand pieces, we could incur significant legal fees and expenses in defending and, or settling such claims. Although we maintain product liability insurance, there is no assurance that all losses will be covered. Each potential cl aim will be evaluated on a case by case basis. At June 30, 2010, we have not recognized any expense in our Condensed Consolidated Financial Statements with respect to any potential contingent liability associated with any potential lawsuits that may arise.


Contractual Obligations

We believe that there were no significant changes during the six months ended June 30, 2010 in our payments due under contractual obligations, as disclosed in our Annual Report on Form 10-K for the year ended December 31, 2009.
 
Indemnifications
 
In the normal course of business, we enter into agreements that contain a variety of representations, warranties, and indemnification obligations. For example, we entered into indemnification agreements with each of our directors and executive officers. Our exposure under the various indemnification obligations, including those under the indemnification agreements with our directors and executive officers, is unknown since indemnification obligations involve future claims that may be made against us. We have not accrued or paid any amounts for any such indemnification obligations to date.


QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
 
Interest Rate Sensitivity
 
Our exposure to interest rate risk relates primarily to our investment portfolio. Fixed rate securities may have their fair market value adversely impacted due to fluctuations in interest rates, while floating rate securities may produce less income than expected if interest rates fall. Due in part to these factors, our future investment income may fall short of expectation due to changes in interest rates or we may suffer losses in principal if forced to sell securities which have declined in market value due to changes in interest rates. The primary objective of our investment activities is to preserve principal while at the same time maximizing yields without significantly increasing risk. To achieve this objective, we invest in debt instruments of the U.S. Government and its agencies and municipal bonds, and, by policy, restrict our e xposure to any single type of investment or issuer by imposing concentration limits. To minimize the exposure due to adverse shifts in interest rates, we maintain investments at a weighted average maturity (interest reset date for ARS) of generally less than eighteen months. Assuming a hypothetical increase in interest rates of one percentage point, the fair value of our total investment portfolio would have potentially declined by approximately $310,000 as of June 30, 2010.

We hold interest bearing ARS that represent investments in pools of student loans issued by the Federal Family Education Loan Program. At the time of acquisition, these ARS investments were intended to provide liquidity via an auction process that resets the applicable interest rate at predetermined calendar intervals, allowing investors to either roll over their holdings or gain immediate liquidity by selling such interests at par. Uncertainties in the credit markets affected our holdings in ARS investments and auctions for some of our investments in these securities continue to fail. As of June 30, 2010, $4.7 million of our original $13.4 million par value portfolio had been redeemed in full and we had $8.7 million par value (fair value of $7.1 million) whose auctions continue to fail. These investments are not currently liquid and we w ill not be able to access these funds until a future auction of these investments is successful, a buyer is found outside of the auction process or the ARS is refinanced by the issuer into another type of debt instrument. Maturity dates for these ARS investments range from 2028 to 2043. We currently classify all of these investments as long-term investments in our Condensed Consolidated Balance Sheet because of our continuing inability to determine when these investments will settle. We have also modified our current investment strategy and increased our investments in more liquid money market investments, United States Treasury securities, municipal bonds, and eliminated investments in corporate debt. The valuation of our ARS investment portfolio is subject to uncertainties that are difficult to predict. Factors that may impact its valuation include, duration of time that the ARS remain illiquid, changes to credit ratings of the securities, rates of default of the underlying assets, changes in the underlyin g collateral value, market discount rates for similar illiquid investments, ongoing strength and quality of credit markets. If there is a further decline in the valuation, then we would have to: (i) record additional reductions to the fair value of our ARS investments; and (ii) record unrealized losses in our accumulated comprehensive income (loss) for the losses in value that are associated with market risk. If the decline in fair value is considered other-than-temporary then we would have to record an impairment charge in our Condensed Consolidated Statement of Operations for the loss in value associated with the worsening of the credit worthiness (credit losses) of the issuer, which would reduce future earnings and harm our business.

Foreign Currency Exchange Risk
 
We have international subsidiaries and operations and are, therefore, subject to foreign currency rate exposure. Although the majority of our revenue and purchases are denominated in U.S. dollars, we have revenue to certain international customers and expenses denominated in the Japanese Yen, Euro, Pounds Sterling, Australian Dollars, Swiss Francs and Canadian Dollars. The net foreign exchange losses were approximately $78,000 in the six months ended June 30, 2010, which is included in our Condensed Consolidated Statements of Operations. Movements in currency exchange rates could cause variability in our revenues, expenses or interest and other income (expense). Though to date our exposure to exchange rate volatility has not been significant, we cannot assure that there will not be a material impact in the future. Future fluctuations in t he value of the U.S. dollar may affect the price competitiveness of our products. We do not believe, however, that we currently have significant direct foreign currency exchange rate risk and have not hedged exposures denominated in foreign currencies.
 
Derivative Financial Instruments

We do not utilize derivative financial instruments, derivative commodity instruments or other market risk sensitive instruments.


CONTROLS AND PROCEDURES
 
Evaluation of Disclosure Controls and Procedures
 
Attached as exhibits to this Quarterly Report are certifications of our Chief Executive Officer (CEO) and Chief Financial Officer (CFO), which are required in accordance with Rule 13a-14 of the Securities Exchange Act of 1934, as amended (Exchange Act). This Controls and Procedures section includes the information concerning the controls evaluation referred to in the certifications, and it should be read in conjunction with the certifications for a more complete understanding of the topics presented.

We conducted an evaluation of the effectiveness of the design and operation of its disclosure controls and procedures (as defined in the Rules 13a-15(e) and 15d-15(e) under the Exchange Act) (Disclosure Controls) as of the end of the period covered by this Report required by Exchange Act Rules 13a-15(b) or 15d-15(b). The controls evaluation was conducted under the supervision and with the participation of our management, including the CEO and CFO. Based on this evaluation, the CEO and CFO have concluded that as of the end of the period covered by this report the disclosure controls and procedures were effective at a reasonable assurance level.
 
Definition of Disclosure Controls
 
Disclosure Controls are controls and procedures designed to reasonably assure that information required to be disclosed in the our reports filed under the Exchange Act, such as this Report, is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms. Disclosure Controls are also designed to reasonably assure that such information is accumulated and communicated to our management, including the CEO and CFO, as appropriate to allow timely decisions regarding required disclosure. Our Disclosure Controls include components of internal control over financial reporting, which consists of control processes designed to provide reasonable assurance regarding the reliability of its financial reporting and the preparation of financial statements in accordance with generally accepted accounting principles in the U.S. To the extent that components of our internal control over financial reporting are included within Disclosure Controls, they are included in the scope of our annual controls evaluation.

Limitations on the Effectiveness of Controls
 
Our management, including the CEO and CFO, does not expect that our disclosure controls or internal control over financial reporting will prevent all error and all fraud. A control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the control system’s objectives will be met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, have been detected. These inherent limitations include the realities that judgments in decision making can be faulty and that breakdowns can occur because of simple error or mistake. Controls can also be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of the controls. The design of any system of controls is based in part on certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions. Over time, controls may become inadequate because of changes in conditions or deterioration in the degree of compliance with policies or procedures. Because of the inherent limitations in a cost-effective control system, misstatements due to error or fraud may occur and not be detected.

Changes in Internal Control over Financial Reporting
 
There were no changes in our internal control over financial reporting that occurred during the most recent fiscal quarter that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.
 
PART II. OTHER INFORMATION
 
ITEM 1.
LEGAL PROCEEDINGS

The information under the heading “Litigation” set forth in Note 8 of the Notes to Condensed Consolidated Financial Statements in Part I, Item 1 of this quarterly report on Form 10-Q is incorporated herein by reference.


RISK FACTORS

For the quarter ended June 30, 2010, our quarterly U.S. revenue increased by approximately 5%, compared to the same period in 2009. However, our U.S. revenue is significantly below the pre-2009 level and many of our prospective customers remain reluctant to purchase capital equipment and our average selling prices (or ASPs) are lower than they were in 2009. If our U.S. revenue does not improve, it could have a material adverse effect on our total revenue, profitability, employee retention and stock price.

For the quarter ended June 30, 2010, our quarterly U.S. revenue increased by approximately 5%, compared to the same period in 2009. However, our U.S. revenue is significantly below the pre-2009 level due to several factors, some of which are:

 
·
We believe many of our current and prospective customers that do not have established medical offices continue to be reluctant to purchase capital equipment. In times of general economic uncertainty and tight credit, individuals often reduce or delay their capital equipment purchase decisions and we believe the credit market is negatively affecting sales.
 
·
Our ASPs are lower than their pre-2009 levels as a result of customers purchasing fewer applications and lower prices being charged by our sales representatives due to the economy.
 
·
We believe there continues to be a lack of availability of consumer credit for some of our customers that do not have established medical offices, e.g. medi-spas, which is contributing to reduced volume.

If our U.S. revenue does not improve, it could have a material adverse effect on our total revenue, profitability, employee retention and stock price.

If we are not able to reduce expenses, our loss from operations may and cash used will increase, which could reduce our cash asset and have a material adverse effect on our stock price.

In response to reduced revenue, we cut various sales, customer relations, manufacturing, and service expenses in the first half of 2009. We implemented three reduction-in-force (or RIF) programs in 2009, specifically targeting positions that were directly impacted by the business slow down. Even though we implemented the restructurings, we had a significant loss from operations and used significant cash in our operations during the six months ended June 30, 2010. If our revenues do not improve, or if we are not able to further reduce expenses, we may continue to generate losses from operations and use cash, which could reduce our cash asset and have a material adverse effect on our operations and stock price.

We face various risks and uncertainties as a result of our voluntary Titan XL recall program, including harm to our business, reputation, financial position and results of operations.

We discovered that under specific conditions, such as infrequent use or operators not following the prescribed maintenance program outlined in the owner’s manual, certain component parts of one of our hand pieces ─ the Titan XL ─ could become defective. As a result, the defective hand piece could produce energy above that stated on the device setting, which could cause injury to patients, including redness, erythema, blisters and burns.  In response to discovering this issue, we initiated a voluntary recall of our global installed base of Titan XL hand pieces starting May 2010. Though we continue to actively attempt to reach all customers through various communications notifying them of the voluntary recall, we may not be able to replace all our hand pieces before a patient of our customer is injured. Following a voluntary recall, there is generally an increase in product liability lawsuits filed against the Company.

If we are not able to completely replace all Titan XL hand pieces and there is a defective hand piece that results in an injury, or if there are patients injured due to the malfunctioning of one of our voluntarily recalled Titan XL hand pieces, we could incur significant legal fees and expenses in defending and, or settling such claims. Although we maintain product liability insurance, there is no assurance that all losses will be covered. Each potential claim will be evaluated on a case by case basis. At June 30, 2010, we have not recognized any expense in our Condensed Consolidated Financial Statements with respect to any potential contingent liability associated with any potential lawsuits that may arise.

Our Titan hand piece refill revenue decreased 32% in the three months and 18% in the six months ended June 2010, compared to the same periods in 2009. These decreases were due primarily to our voluntary recall of our Titan XL hand piece in the first-half of 2010, in which we provided our eligible customers with a fully “refilled” Titan XL hand piece. If customers do not return to using their Titan hand pieces due to this voluntary recall, our Titan refill revenue could be negatively impacted in the future.

If either of the above mentioned two risks materializes, our revenue and profitability may be adversely affected, could materially harm our business, and our stock price could decline.

We rely heavily on our sales professionals to market and sell our products worldwide. If we are unable to effectively train, retain and manage the sales professionals, our business will be harmed, which would impair our future revenue and profitability.
 
Our success largely depends on our ability to manage and improve the productivity levels of our sales professionals worldwide. Measures we implement in an effort to retain, train and manage our sales professionals and improve their productivity may not be successful. Our direct sales professionals earn a material portion of their compensation through commissions. Unless revenue improves, their total compensation may remain low, which could result in higher turnover. In response to reduced commission earnings resulting from the decrease in revenue, some of our sales professionals left the industry entirely or left our company to work for our competitors. We are selectively hiring new sales professionals in key territories to fill vacant positions. The replacement or absence of seasoned sales professionals may adversely affect our revenue. In addition, if we experience significant levels of attrition, or reductions in productivity among our sales professionals or our sales managers, our revenue and profitability may be adversely affected and this could materially harm our business.


A lack of customer demand for our products in any of our markets would harm our revenue.
 
Most of our products are marketed to established dermatology and plastic surgeon medical offices, as well as the non-core businesses, such as family practitioners, primary care physicians, gynecologists, and non-medical models. Our Pearl and Pearl Fractional products are targeted at dermatologists and plastic surgeons. Continuing to achieve and maintain penetration into each of our markets is a material assumption of our business strategy.
 
Demand for our products in any of our markets could be weakened by several factors, including:

 
·
Current lack of credit financing for some of our potential customers;

 
·
Poor financial performance of market segments that try introducing aesthetic procedures to their businesses;

 
·
The inability to differentiate our products from those of our competitors;

 
·
Reduced patient demand for elective aesthetic procedures;

 
·
Failure to build and maintain relationships with opinion leaders within the various market segments;

 
·
An increase in malpractice lawsuits that result in higher insurance costs; and

 
·
Our ability to develop and market our products to the core market specialties of dermatologists and plastic surgeons.

If we do not achieve anticipated demand for our products our revenue may be adversely impacted.
 
The aesthetic equipment market is characterized by rapid innovation. To compete effectively, we must develop and/or acquire new products, market them successfully, and identify new markets for our technology.
 
We have created products to apply our technology to hair removal, treatment of veins and skin rejuvenation, including the treating of diffuse redness, skin laxity, fine lines, wrinkles, skin texture, pore size and pigmented lesions. Currently, these applications represent the majority of offered laser and other energy-based aesthetic procedures. We have recently started distributing topical skin creams and dermal fillers in the Japanese market and plan to distribute an ultrasonic liposuction device for the body contouring market in Europe and Canada. To grow in the future, we must develop and acquire new and innovative aesthetic products and applications, identify new markets, and successfully launch the newly acquired or developed product offerings.
 
To successfully expand our product offerings, we must, among other things:
 
 
·
Develop and acquire new products that either add to or significantly improve our current product offerings;

 
·
Convince our existing and prospective customers that our product offerings would be an attractive revenue-generating addition to their practice;

 
·
Sell our product offerings to a broad customer base;

 
·
Identify new markets and alternative applications for our technology;

 
·
Protect our existing and future products with defensible intellectual property; and

 
·
Satisfy and maintain all regulatory requirements for commercialization.
 
With the exception of 2009, we have introduced at least one new product every year since 2000. In November 2009, we announced that we postponed indefinitely the release of our TruSculpt body contouring product. Historically, product introductions have been a significant component of our financial performance. To be successful in the aesthetics industry, we need to continue to innovate. Our business strategy has therefore been based, in part, on our expectation that we will continue to increase our product offerings. We need to continue to devote substantial research and development resources to make new product introductions, which can be costly and time consuming to our organization.


We also believe that, to increase revenue from sales of new products and related upgrades, we need to continue to develop our clinical support, further expand and nurture relationships with industry thought leaders and increase market awareness of the benefits of our new products. However, even with a significant investment in research and development, we may be unable to continue to develop, acquire or effectively launch and market new products and technologies regularly, or at all. If we fail to successfully commercialize new products, our business may be harmed.
 
While we attempt to protect our products through patents and other intellectual property, there are few barriers to entry that would prevent new entrants or existing competitors from developing products that compete directly with ours. For example, while our
CoolGlide product was the first long-pulse Nd:YAG, or long wavelength, laser system cleared by the FDA for permanent hair reduction on all skin types, competitors have subsequently introduced systems that utilize Nd:YAG lasers, and received FDA clearances to market these products as treating all skin types. We expect that any competitive advantage we may enjoy from other current and future innovations, such as combining multiple hand pieces in a single system to perform a variety of applications, may diminish over time as companies successfully respond to our, or create their own, innovations. Consequently, we believe that we will have to continuously innovate and improve our products and technology to compete successfully. If we are unable to innovate successfully, our products could become obsolete and our revenue could decline as our c ustomers and prospects purchase our competitors’ products.

If there is not sufficient consumer demand for the procedures performed with our products, practitioner demand for our products could be inhibited, resulting in unfavorable operating results and reduced growth potential.
 
Continued expansion of the global market for laser and other energy-based aesthetic procedures is a material assumption of our business strategy. Most procedures performed using our products are elective procedures not reimbursable through government or private health insurance, with the costs borne by the patient. The decision to utilize our products may therefore be influenced by a number of factors, including:

Consumer disposable income and access to consumer credit, which as a result of the unstable economy, may have been significantly impacted;

 
·
The cost of procedures performed using our products;

 
·
The cost, safety and effectiveness of alternative treatments, including treatments which are not based upon laser or other energy-based technologies and treatments which use pharmaceutical products;

 
·
The success of our sales and marketing efforts; and

 
·
The education of our customers and patients on the benefits and uses of our products, compared to competitors’ products and technologies.

If, as a result of these factors, there is not sufficient demand for the procedures performed with our products, practitioner demand for our products could be reduced, which could have a material adverse effect on our business, financial condition, revenue and result of operations.

Any defects in the design, material or workmanship of our products may not be discovered prior to shipment to customers, which could materially increase our expenses, adversely impact profitability and harm our business.

The design of our products is complex. To manufacture them successfully, we must procure quality components and employ individuals with a significant degree of technical expertise. If our designs are defective, or the material components used in our products subject to wear out, or if suppliers fail to deliver components to specification, or if our employees fail to properly assemble, test and package our products, the reliability and performance of our products will be adversely impacted. As an example, in the six months ended June 30, 2010, we recorded a $487,000 charge for the voluntary recall of our Titan XL hand pieces.

If our products contain defects that cannot be repaired easily, inexpensively, or on a timely basis, we may experience:
 
 
·
Damage to our brand reputation;

 
·
Loss of customer orders and delay in order fulfillment;

 
·
Increased costs due to product repair or replacement;

 
·
Inability to attract new customers;

 
·
Diversion of resources from our manufacturing and research and development departments into our service department; and

 
·
Legal action.


The occurrence of any one or more of the foregoing could materially increase expenses, adversely impact profitability and harm our business.

Federal regulatory reforms and changes occurring at the U.S. Food and Drug Administration, or FDA, could adversely affect our ability to sell our products profitably and financial condition.

From time to time, legislation is drafted and introduced in Congress that could significantly change the statutory provisions governing the clearance or approval, manufacture and marketing of a device. It is impossible to predict whether legislative changes will be enacted or FDA regulations, guidance or interpretations changed, and what the impact of such changes, if any, may be.

In addition, FDA regulations and guidance are often revised or reinterpreted by the agency in ways that may significantly affect our business and our products. Changes in FDA regulations may lengthen the regulatory approval process for medical devices and require additional clinical data to support regulatory clearance for the sale and marketing of our new products. In addition, it may require additional safety monitoring, labeling changes, restrictions on product distribution or use, or other measures after the introduction of our products to market. Either of these changes lengthen the duration to market, increase our costs of doing business, adversely affect the future permitted uses of approved products, or otherwise adversely affect the market for our products.

If we fail to obtain or maintain necessary FDA clearances for our products and indications, if clearances for future products and indications are delayed or not issued, if there are federal or state level regulatory changes or if we are found to have violated applicable FDA marketing rules, our commercial operations would be harmed.
 
Our products are medical devices that are subject to extensive regulation in the United States by the FDA for manufacturing, labeling, sale, promotion, distribution and shipping. Before a new medical device, or a new use of or labeling claim for an existing product, can be marketed in the United States, it must first receive either 510(k) clearance or pre-marketing approval from the FDA, unless an exemption applies. Either process can be expensive and lengthy. In the event that we do not obtain FDA clearances or approvals for our products, our ability to market and sell them in the United States and revenue derived there from may be adversely affected.
 
Medical devices may be marketed in the United States only for the indications for which they are approved or cleared by the FDA. For example, we have FDA clearance to market our Titan product in the United States only for deep heating for the temporary relief of muscle aches and pains; and to market our Pearl Fractional product in the United States only for skin resurfacing. Therefore we are prevented from promoting or advertising Titan in the United States and Pearl Fractional in the United States for any other indications. If we fail to comply with these regulations, it could result in enforcement action by the FDA which could lead to such consequences as warning letters, adverse publicity, criminal enforcement action and/or third-party civil litigation, each of which could adversely affect us.
 
We have obtained 510(k) clearance for the indications for which we market our products. However, our clearances can be revoked if safety or effectiveness problems develop. We also are subject to Medical Device Reporting regulations, which require us to report to the FDA if our products cause or contribute to a death or serious injury, or malfunction in a way that would likely cause or contribute to a death or serious injury. Our products are also subject to state regulations, which are, in many instances frequently changing. Changes in state regulations may impede sales. For example, federal regulations allow our products to be sold to, or on the order of, “licensed practitioners,” as determined on a state-by-state basis. As a result, in some states, non-physicians may legally purchase our products. However, a state could chan ge its regulations at any time, thereby disallowing sales to particular types of end users. We cannot predict the impact or effect of future legislation or regulations at the federal or state levels.
 
 The FDA and state authorities have broad enforcement powers. If we fail to comply with applicable regulatory requirements, it could result in enforcement action by the FDA or state agencies, which may include any of the following sanctions:
 
 
·
Warning letters, fines, injunctions, consent decrees and civil penalties;

 
·
Repair, replacement, recall or seizure of our products;

 
·
Operating restrictions or partial suspension or total shutdown of production;

 
·
Refusing our requests for 510(k) clearance or pre-market approval of new products, new intended uses, or modifications to existing products;


 
·
Withdrawing 510(k) clearance or pre-market approvals that have already been granted; and

 
·
Criminal prosecution.
 
If any of these events were to occur, it could harm our business.
 
If we fail to comply with the FDA’s Quality System Regulation and laser performance standards, our manufacturing operations could be halted, and our business would suffer.
 
We are currently required to demonstrate and maintain compliance with the FDA’s Quality System Regulation, or QSR. The QSR is a complex regulatory scheme that covers the methods and documentation of the design, testing, control, manufacturing, labeling, quality assurance, packaging, storage and shipping of our products. Because our products involve the use of lasers, our products also are covered by a performance standard for lasers set forth in FDA regulations. The laser performance standard imposes specific record-keeping, reporting, product testing and product labeling requirements. These requirements include affixing warning labels to laser products, as well as incorporating certain safety features in the design of laser products. The FDA enforces the QSR and laser performance standards through periodic unannounced inspections. Our failure to take satisfactory corrective action in response to an adverse QSR inspection or our failure to comply with applicable laser performance standards could result in enforcement actions, including a public warning letter, a shutdown of our manufacturing operations, a recall of our products, civil or criminal penalties, or other sanctions, such as those described in the preceding paragraph, which would cause our sales and business to suffer.

If we modify one of our FDA-approved devices, we may need to seek re-approval, which, if not granted, would prevent us from selling our modified products or cause us to redesign our products.
 
Any modifications to an FDA-cleared device that would significantly affect its safety or effectiveness or that would constitute a major change in its intended use would require a new 510(k) clearance or possibly a pre-market approval. We may not be able to obtain additional 510(k) clearance or pre-market approvals for new products or for modifications to, or additional indications for, our existing products in a timely fashion, or at all. Delays in obtaining future clearance would adversely affect our ability to introduce new or enhanced products in a timely manner, which in turn would harm our revenue and future profitability.
 
We have made modifications to our devices in the past and may make additional modifications in the future that we believe do not or will not require additional clearance or approvals. If the FDA disagrees, and requires new clearances or approvals for the modifications, we may be required to recall and to stop marketing the modified devices, which could harm our operating results and require us to redesign our products.
 
We may be unable to obtain or maintain international regulatory qualifications or approvals for our current or future products and indications, which could harm our business.
 
Sales of our products outside the United States are subject to foreign regulatory requirements that vary widely from country to country. In addition, exports of medical devices from the United States are regulated by the FDA. Complying with international regulatory requirements can be an expensive and time-consuming process and approval is not certain. The time required to obtain clearance or approvals, if required by other countries, may be longer than that required for FDA clearance or approvals, and requirements for such clearances or approvals may significantly differ from FDA requirements. We may be unable to obtain or maintain regulatory qualifications, clearances or approvals in other countries. We may also incur significant costs in attempting to obtain and in maintaining foreign regulatory approvals or qualifications. If we exper ience delays in receiving necessary qualifications, clearances or approvals to market our products outside the United States, or if we fail to receive those qualifications, clearances or approvals, we may be unable to market our products or enhancements in international markets effectively, or at all, which could have a material adverse effect on our business and growth strategy.
 
Product liability suits could be brought against us due to a defective design, material or workmanship or misuse of our products and could result in expensive and time-consuming litigation, payment of substantial damages and an increase in our insurance rates.
 
If our products are defectively designed, manufactured or labeled, contain defective components or are misused, we may become subject to substantial and costly litigation by our customers or their patients. Misusing our products or failing to adhere to operating guidelines could cause significant eye and skin damage, and underlying tissue damage. In addition, if our operating guidelines are found to be inadequate, we may be subject to liability. We have been involved, and may in the future be involved, in litigation related to the use of our products. Product liability claims could divert management’s attention from our core business, be expensive to defend and result in sizable damage awards against us. We may not have sufficient insurance coverage for all future claims. We may not be able to obtain insurance in amounts or scope su fficient to provide us with adequate coverage against all potential liabilities. Any product liability claims brought against us, with or without merit, could increase our product liability insurance rates or prevent us from securing continuing coverage, could harm our reputation in the industry and could reduce product sales. In addition, we historically experienced steep increases in our product liability insurance premiums as a percentage of revenue. If our premiums continue to rise, we may no longer be able to afford adequate insurance coverage.


If we are unable to maintain adequate insurance coverage, or we have product liability claims in excess of our insurance coverage, claims would be paid out of cash reserves, thereby harming our financial condition, operating results and profitability.

Because we do not require training for users of our products, and sell our products at times to non-physicians, there exists an increased potential for misuse of our products, which could harm our reputation and our business.
 
Federal regulations allow us to sell our products to or on the order of “licensed practitioners.” The definition of “licensed practitioners” varies from state to state. As a result, our products may be purchased or operated by physicians with varying levels of training, and in many states, by non-physicians, including nurse practitioners, chiropractors and technicians. Outside the United States, many jurisdictions do not require specific qualifications or training for purchasers or operators of our products. We do not supervise the procedures performed with our products, nor do we require that direct medical supervision occur. We and our distributors generally offer but do not require product training to the purchasers or operators of our products. In addition, we sometimes sell our systems to companies that rent o ur systems to third parties and that provide a technician to perform the procedures. The lack of training and the purchase and use of our products by non-physicians may result in product misuse and adverse treatment outcomes, which could harm our reputation and our business, and, in the event these result in product liability litigation, distract management and subject us to liability, including legal expenses.

We have recently entered into strategic alliances to distribute third party products internationally. To successfully market and sell these products, we must address many issues that are unique to these businesses and could reduce our available cash reserves and negatively impacting our profitability.

Recently, we have entered into distribution arrangements pursuant to which we utilize our sales force and distributors to sell products manufactured by other companies. We entered into an agreement with Obagi Medical Products, Inc. (Obagi), to distribute certain of their proprietary cosmeceuticals, or skin care products, in Japan. This agreement requires us to purchase a minimum dollar amount of Obagi products of $1.25 million in 2010, and the purchase commitments for 2011 and beyond have yet to be determined. In addition, we entered into an agreement with Sound Surgical Technologies, Inc. to distribute their VASER® Lipo System in certain European countries and Canada. Finally, we also have an agreement with BioForm Medical Inc., to distribute their Radiesse® dermal filler product in Japan. Each of these distribution agreements presents its own unique risks and challenges. For example, to sell products in partnership with Obagi we need to invest in creating a sales structure that is experienced in the sale of cosmeceuticals and not in capital equipment. We need to commit resources to training this sales force, obtaining regulatory licenses in Japan and developing new marketing materials to promote the sale of Obagi products. For each of these distribution arrangements, until we can develop our own experienced sales force, we may need to pay third party distributors to sell the products which will result in higher fees and lower margins than if we sell direct to customers. In addition, the minimum commitments and other costs of distributing products manufactured by these companies may exceed the incremental revenue that we derive from the sale of their products thereby reducing our available cash reserves and negatively impacting our profitability.

To successfully market and sell our products internationally, we must address many issues that are unique to our international business.
 
Our international revenue was $7.4 million and $16.6 million in the three and six months ended June 30, 2010, respectively, which represented 61% and 64% of our total revenue, respectively. International revenue is a material component of our business strategy. We depend on third-party distributors and a direct sales force to sell our products internationally, and if they underperform, we may be unable to increase or maintain our level of international revenue. To grow our business, we will need to improve productivity in current sales territories and expand into new territories. However, direct sales productivity may not improve and distributors may not accept our business or commit the necessary resources to market and sell our products to the level of our expectations. As a result, we may not be able to increase or maintain internation al revenue growth.

We believe, as we continue to manage our international operations and develop opportunities in additional international territories, our international revenue will be subject to a number of risks, including:

 
·
Difficulties in staffing and managing our foreign operations;

 
·
Export restrictions, trade regulations and foreign tax laws;

 
·
Fluctuating foreign currency exchange rates;

 
·
Foreign certification and regulatory requirements;


 
·
Lengthy payment cycles and difficulty in collecting accounts receivable;

 
·
Customs clearance and shipping delays;

 
·
Political and economic instability;

 
·
Lack of awareness of our brand in international markets;

 
·
Preference for locally-produced products; and

 
·
Reduced protection for intellectual property rights in some countries.
 
If one or more of these risks were realized, it could require us to dedicate significant resources to remedy the situation; and if we were unsuccessful at finding a solution, we may not be able to sell our products in a particular market and, as a result, our revenue may decline.

We compete against companies that offer alternative solutions to our products; or have greater resources, a larger installed base of customers and broader product offerings than ours. If we are not able to effectively compete with these companies, it may harm our business.

Our industry is subject to intense competition. Our products compete against similar products offered by public companies, such as Cynosure, Elen (in Italy), Iridex, Palomar, Solta, and Syneron and as well as private companies such as Alma, Lumenis, Sciton and several other companies. Recently, there has been consolidation in the aesthetic industry leading to companies combining their resources. For example, Solta (previously Thermage) acquired Reliant in December 2008 and Aesthera in February 2010; and Syneron acquired Candela in September 2009. We are likely to compete with new companies in the future. Competition with these companies could result in reduced selling prices, reduced profit margins and loss of market share, any of which would harm our business, financial condition and results of operations.

The light-based aesthetic market faces competition from non light-based medical products, such as Botox, an injectable compound used to reduce wrinkles, and collagen injections. Other alternatives to the use of our products include electrolysis, a procedure involving the application of electric current to eliminate hair follicles, and chemical peels. We may also face competition from manufacturers of pharmaceutical and other products that have not yet been developed.

Our ability to compete effectively depends upon our ability to distinguish our company and our products from our competitors and their products, and includes such factors as:

 
·
Success and timing of new product development and introductions;

 
·
Product performance;

 
·
Product pricing;

 
·
Quality of customer support;

 
·
Development of successful distribution channels, both domestically and internationally; and

 
·
Intellectual property protection.
 
To compete effectively, we have to demonstrate that our products are attractive alternatives to other devices and treatments by differentiating our products on the basis of such factors as performance, brand name, service and price, and this is difficult to do in a crowded aesthetic market. Some of our competitors have newer or different products and more established customer relationships than we do, which could inhibit our market penetration efforts. For example, we have encountered, and expect to continue to encounter, situations where, due to pre-existing relationships, potential customers decided to purchase additional products from our competitors. Potential customers also may need to recoup the cost of products that they have already purchased from our competitors and may decide not to purchase our products, or to delay such purcha ses. If we are unable to achieve continued market penetration, we will be unable to compete effectively and our business will be harmed.

If PSS World Medical fails to perform to our expectations, we may fail to achieve anticipated operating results.
 
We have a distribution agreement with PSS World Medical. PSS sales professionals work in coordination with our sales force to locate new customers for our products throughout the United States. Revenue from PSS declined significantly in 2009, compared to 2008. Our revenue from PSS as a percentage of worldwide revenue was 5% for the six months ended June 30, 2010, 7% in 2009 and 14% in 2008. Although we continue to work closely with, and focus our attention on, our PSS relationship, there is no assurance that this will translate into increased revenue for us. Further, if PSS does not perform adequately under the arrangement, or terminates our relationship, it may have a material adverse effect on our business, financial condition and results of operations.


Adverse conditions in the global banking industry and credit markets may adversely impact the value of our marketable investments or impair our liquidity.
 
We invest our excess cash primarily in money market funds and in highly liquid debt instruments of the U.S. government and its agencies, and U.S. municipalities. As of June 30, 2010, our balance in marketable investment was $60.3 million. The longer the duration of a security, the more susceptible it is to changes in market interest rates and bond yields. As yields increase, those securities with a lower yield-at-cost show a mark-to-market unrealized loss. For example, assuming a hypothetical increase in interest rates of one percentage point, the fair value of our total investment portfolio as of June 30, 2010 would have potentially decreased by approximately $310,000, resulting in an unrealized loss that would subsequently adversely impact our earnings. As a result, changes in the market interest rates will affect our future net income (loss).
 
We may be required to record impairment charges in future quarters as a result of the decline in value of our long-term investments in auction rate securities (ARS).

Included under the caption of “Long-term investments” in the Condensed Consolidated Balance Sheet as of June 30, 2010, are $7.1 million of ARS. These ARS are designed to provide liquidity through an auction process that resets the applicable interest rate at predetermined calendar intervals, generally every 35 days. Though approximately $4.7 million (par value) of our original holdings of $13.4 million (par value) of ARS have been redeemed at full par value since 2008, auctions for the remaining ARS in our portfolio at June 30, 2010 have continued to fail since February 2008 due to the lack of liquidity and overall credit concerns in capital markets. Upon an auction failure, the interest rates do not reset at a market rate but instead reset based on a formula contained in the security, which rate is generally higher than the c urrent market rate. The failure of the auctions impacts our ability to readily liquidate our ARS into cash until a future auction of these investments is successful, a buyer is found outside of the auction process or the ARS is refinanced by the issuer into another type of debt instrument.
 
If there is a decline in fair value in our ARS that is considered other-than-temporary then we would have to record an impairment charge in our Condensed Consolidated Statement of Operations for the loss in value associated with the worsening of the credit worthiness (credit losses) of the issuer, which would reduce future earnings, harm our business and may cause our stock price to decline.

We depend on skilled and experienced personnel to operate our business effectively. If we are unable to recruit, hire and retain these employees, our ability to manage and expand our business will be harmed, which would impair our future revenue and profitability.
 
Our success largely depends on the skills, experience and efforts of our officers and other key employees. Except for Change of Control and Severance Agreements for our executive officers, we do not have employment contracts with any of our officers or other key employees. Any of our officers and other key employees may terminate their employment at any time. We do not have a succession plan in place for each of our officers and key employees. In addition, we do not maintain “key person” life insurance policies covering any of our employees. The loss of any of our senior management team members could weaken our management expertise and harm our business.
 
Our ability to retain our skilled labor force and our success in attracting and hiring new skilled employees are critical factors in determining whether we will be successful in the future. We may not be able to meet our future hiring needs or retain existing personnel. We may face particularly significant challenges and risks in hiring, training, managing and retaining engineering and sales and marketing employees. Failure to attract and retain personnel, particularly technical and sales and marketing personnel, would materially harm our ability to compete effectively and grow our business.

The price of our common stock may fluctuate substantially. We have a limited number of shares of common stock outstanding, a large portion of which is held by a small number of investors, which could result in the increase in volatility of our stock price.
 
As of March 31, 2010, approximately 55% of our outstanding shares of common stock were held by 10 institutional investors. As a result of our relatively small public float, our common stock may be less liquid than the stock of companies with broader public ownership. Among other things, trading of a relatively small volume of our common stock may have a greater impact on the trading price for our shares than would be the case if our public float were larger.
 
The public market price of our common stock has in the past fluctuated substantially and, due to the current concentration of stockholders, it may continue to do so in the future. The market price for our common stock could also be affected by a number of other factors, including:
 
 
·
The general market conditions unrelated to our operating performance;


 
·
Sales of large blocks of our common stock, including sales by our executive officers, directors and our large institutional investors;

 
·
Quarterly variations in our, or our competitors’, results of operations;

 
·
Changes in analysts’ estimates, investors’ perceptions, recommendations by securities analysts or our failure to achieve analysts’ estimates;

 
·
The announcement of new products or service enhancements by us or our competitors;

 
·
The announcement of the departure of a key employee or executive officer by us or our competitor;

 
·
Regulatory developments or delays concerning our, or our competitors’ products; and

 
·
The initiation of litigation by us or against us.
 
Actual or perceived instability in our stock price could reduce demand from potential buyers of our stock, thereby causing our stock price to either remain depressed or to decline further.
 
We may be involved in future costly intellectual property litigation, which could impact our future business and financial performance.
 
Our competitors or other patent holders may assert that our present or future products and the methods we employ are covered by their patents. In addition, we do not know whether our competitors own or will obtain patents that they may claim prevent, limit or interfere with our ability to make, use, sell or import our products. Although we may seek to resolve any potential future claims or actions, we may not be able to do so on reasonable terms, or at all. If, following a successful third-party action for infringement, we cannot obtain a license or redesign our products, we may have to stop manufacturing and selling the applicable products and our business would suffer as a result. In addition, a court could require us to pay substantial damages, and prohibit us from using technologies essential to our products, any of which would have a material adverse effect on our business, results of operations and financial condition.
 
We may become involved in litigation not only as a result of alleged infringement of a third party’s intellectual property rights but also to protect our own intellectual property. For example, we have been, and may hereafter become, involved in litigation to protect the trademark rights associated with our company name or the names of our products. Infringement and other intellectual property claims, with or without merit, can be expensive and time-consuming to litigate, and could divert management’s attention from our core business.
 
Any acquisitions that we make could disrupt our business and harm our financial condition.
 
We expect to evaluate potential strategic acquisitions of complementary businesses, products or technologies. We may also consider joint ventures and other collaborative projects. We may not be able to identify appropriate acquisition candidates or strategic partners, or successfully negotiate, finance or integrate any businesses, products or technologies that we acquire. Furthermore, the integration of any acquisition and management of any collaborative project may divert management’s time and resources from our core business and disrupt our operations and we may incur significant legal, accounting and banking fees in connection with such a transaction. In addition, if we purchase a company that is not profitable, our cash balances may be reduced or depleted. We do not have any experience as a team with acquiring companies or produ cts. If we decide to expand our product offerings beyond laser and other energy-based products, we may spend time and money on projects that do not increase our revenue. Any cash acquisition we pursue would diminish our available cash balances to us for other uses, and any stock acquisition could be dilutive to our stockholders.
 
While we from time to time evaluate potential acquisitions of businesses, products and technologies, and anticipate continuing to make these evaluations, we have no present understandings, commitments or agreements with respect to any material acquisitions or collaborative projects.

Our manufacturing operations are dependent upon third-party suppliers, making us vulnerable to supply shortages and price fluctuations, which could harm our business.

Many of the components and materials that comprise our products are currently manufactured by a limited number of suppliers. A supply interruption or an increase in demand beyond our current suppliers’ capabilities could harm our ability to manufacture our products until a new source of supply is identified and qualified. Our reliance on these suppliers subjects us to a number of risks that could harm our business, including:


 
·
Interruption of supply resulting from modifications to or discontinuation of a supplier’s operations;

 
·
Delays in product shipments resulting from uncorrected defects, reliability issues or a supplier’s variation in a component;

 
·
A lack of long term supply arrangements for key components with our suppliers;

 
·
Inability to obtain adequate supply in a timely manner, or on reasonable terms;

 
·
Difficulty locating and qualifying alternative suppliers for our components in a timely manner;

 
·
Production delays related to the evaluation and testing of products from alternative suppliers and corresponding regulatory qualifications; and

 
·
Delay in supplier deliveries.
 
Any interruption in the supply of components or materials, or our inability to obtain substitute components or materials from alternate sources at acceptable prices in a timely manner, could impair our ability to meet the demand of our customers, which would have an adverse effect on our business.

Intellectual property rights may not provide adequate protection for some or all of our products, which may permit third parties to compete against us more effectively.
 
We rely on patent, copyright, trade secret and trademark laws and confidentiality agreements to protect our technology and products. At December 31, 2009, we had thirteen issued U.S. patents. Some of our components, such as our laser module, electronic control system and high-voltage electronics, are not, and in the future may not be, protected by patents. Additionally, our patent applications may not issue as patents or, if issued, may not issue in a form that will be advantageous to us. Any patents we obtain may be challenged, invalidated or legally circumvented by third parties. Consequently, competitors could market products and use manufacturing processes that are substantially similar to, or superior to, ours. We may not be able to prevent the unauthorized disclosure or use of our technical knowledge or other trade secrets by consul tants, vendors, former employees or current employees, despite the existence generally of confidentiality agreements and other contractual restrictions. Monitoring unauthorized uses and disclosures of our intellectual property is difficult, and we do not know whether the steps we have taken to protect our intellectual property will be effective. Moreover, the laws of many foreign countries will not protect our intellectual property rights to the same extent as the laws of the United States.
 
The absence of complete intellectual property protection exposes us to a greater risk of direct competition. Competitors could purchase one of our products and attempt to replicate some or all of the competitive advantages we derive from our development efforts, design around our protected technology, or develop their own competitive technologies that fall outside of our intellectual property rights. If our intellectual property is not adequately protected against competitors’ products and methods, our competitive position and our business could be adversely affected.
 
Healthcare reform legislation could adversely affect our future profitability and financial condition.

The President and members of Congress passed legislation relating to healthcare reform. Our products are not reimbursed by insurance companies or federal or state governments and some of this legislation will, therefore, not affect us. This legislation, however, does include several aspects that will apply to us, including a tax on our U.S. revenue which is applicable to us beginning in 2013. While we are presently evaluating the full scope of how this legislation will impact our operations, including how to administer this tax, we believe this will adversely affect our future profitability and financial condition.

We offer credit terms to some qualified customers and also to leasing companies to finance the purchase of our products. In the event that any of these customers default on the amounts payable to us, our earnings may be adversely affected.
 
While we qualify customers to whom we offer credit terms (generally net 30 to 60 days), we cannot provide any assurance that the financial position of these customers will not change adversely before we receive payment. Our general and administrative expenses and earnings are negatively impacted by customer defaults and cause an increase in the allowance for doubtful accounts. In the event that there is a default by any customers to whom we have provided credit terms in the future, we may recognize a bad debt charge in our general and administrative expenses and this could negatively affect our earnings and results of operations.
 
We are subject to fluctuations in the exchange rate of the U.S. dollar and foreign currencies.
 
As a result of recent fluctuations in currency markets and the strong dollar relative to many other major currencies, our products priced in U.S. dollars may be more expensive relative to products of our foreign competitors, which could result in lower revenue. We do not actively hedge our exposure to currency rate fluctuations. While we transact business primarily in U.S. Dollars, and a significant proportion of our revenue is denominated in U.S. Dollars, a portion of our costs and revenue is denominated in other currencies, such as the Euro, Japanese Yen, Australian Dollar, Canadian Dollar and British Pound Sterling. As a result, changes in the exchange rates of these currencies to the U.S. Dollar will affect our net income (loss).


The expense and potential unavailability of insurance coverage for our customers could adversely affect our ability to sell our products, and therefore our financial condition.
 
Some of our customers and prospective customers have had difficulty in procuring or maintaining liability insurance to cover their operation and use of our products. Medical malpractice carriers are withdrawing coverage in certain states or substantially increasing premiums. If this trend continues or worsens, our customers may discontinue using our products and potential customers may opt against purchasing laser and other energy based products due to the cost or inability to procure insurance coverage. The unavailability of insurance coverage for our customers and prospects could adversely affect our ability to sell our products, and that could harm our financial condition.

Anti-takeover provisions in our Amended and Restated Certificate of Incorporation and Bylaws, and Delaware law, contain provisions that could discourage a takeover.
 
Our Amended and Restated Certificate of Incorporation and Bylaws, and Delaware law, contain provisions that might enable our management to resist a takeover, and might make it more difficult for an investor to acquire a substantial block of our common stock. These provisions include:
 
 
·
A classified board of directors;

 
·
Advance notice requirements to stockholders for matters to be brought at stockholder meetings;

 
·
A supermajority stockholder vote requirement for amending certain provisions of our Amended and Restated Certificate of Incorporation and bylaws;

 
·
Limitations on stockholder actions by written consent; and

 
·
The right to issue preferred stock without stockholder approval, which could be used to dilute the stock ownership of a potential hostile acquirer.

These provisions, as well as Change of Control and Severance Agreements entered into with each of our executive officers, might discourage, delay or prevent a change in control of our company or a change in our management. The existence of these provisions could adversely affect the voting power of holders of common stock and limit the price that investors might be willing to pay in the future for shares of our common stock.
 
UNREGISTERED SALES OF EQUITY SECURITIES AND USE OF PROCEEDS

We did not sell any equity securities during the period covered by this report.
 
DEFAULTS UPON SENIOR SECURITIES
 
None.
 
[REMOVED AND RESERVED]

OTHER INFORMATION
 
None.


EXHIBITS
 
Exhibit No.
 
Description
3.2(1)
 
Amended and Restated Certificate of Incorporation of the Registrant (Delaware).
   
3.4(1)
 
Bylaws of the Registrant.
   
4.1(2)
 
Specimen Common Stock certificate of the Registrant.
   
10.14(3)
 
Cutera, Inc. 2004 Equity Incentive Plan, as amended by its Board of Directors on April 25, 2008
   
 
Certification of Chief Executive Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
   
 
Certification of Chief Financial Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
   
 
Certification of Chief Executive Officer and Chief Financial Officer pursuant to 18 U.S.C Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
________________
(1)
Incorporated by reference from our Registration Statement on Form S-1 (Registration No. 333-111928) which was declared effective on March 30, 2004.
(2)
Incorporated by reference from our Annual Report on Form 10-K filed with the SEC on March 25, 2005.
(3)
Incorporated by reference from our Definitive Proxy Statement on Form 14A filed with the SEC on April 28, 2008.


SIGNATURE
 
Pursuant to the requirements of Section 13 or 15(d) of The Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized, in the city of Brisbane, State of California, on the 2nd day of August, 2010.
 
CUTERA, INC.
 
 
 
/S/ RONALD J. SANTILLI
 
Ronald J. Santilli
 
Executive Vice President and Chief Financial Officer
 
(Principal Financial and Accounting Officer)
 
 
 
40

ex31_1.htm

EXHIBIT 31.1

Certification of Chief Executive Officer

Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002

I, Kevin P. Connors, certify that:

1. I have reviewed this quarterly report on Form 10-Q of Cutera, Inc.:

2. Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

3. Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

4. The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

(a) designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this annual report is being prepared;

(b) designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

(c) evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

(d) disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth quarter in the case of an annual report) that has materially affected or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and

5. The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of registrant’s board of directors:

a) all significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and

b) any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.

Date: August 2, 2010
/S/ KEVIN P. CONNORS
 
Kevin P. Connors
   
 
President, Chief Executive Officer and Director
   
 
(Principal Executive Officer)
 
 

ex31_2.htm
EXHIBIT 31.2

Certification of Chief Financial Officer

Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002

I, Ronald J. Santilli, certify that:

1. I have reviewed this quarterly report on Form 10-Q of Cutera, Inc.:

2. Based on my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

3. Based on my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

4. The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the registrant and have:

(a) designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this annual report is being prepared;

(b) designed such internal control over financial reporting, or caused such internal control over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

(c) evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

(d) disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth quarter in the case of an annual report) that has materially affected or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and

5. The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditor and the audit committee of registrant’s board of:

a) all significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and

b) any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.

Date: August 2, 2010
/S/ RONALD J. SANTILLI
 
Ronald J. Santilli
   
 
Executive Vice President and Chief Financial Officer
   
 
(Principal Financial and Accounting Officer)
 
 

ex32_1.htm
Exhibit 32.1

CERTIFICATIONS OF CHIEF EXECUTIVE OFFICER

AND CHIEF FINANCIAL OFFICER

PURSUANT TO

18 U.S.C. SECTION 1350,

AS ADOPTED PURSUANT TO

SECTION 906 OF THE SARBANES-OXLEY ACT OF 2002

I, Kevin P. Connors, certify, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, that

(i) the accompanying Quarterly Report on Form 10-Q of the Company for the quarterly period ended June 30, 2010 (the “Report”) fully complies with the requirements of Section 13(a) or Section 15(d), as applicable, of the Securities Exchange Act of 1934, as amended; and

(ii) the information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company.

Date: August 2 , 2010
/S/ KEVIN P. CONNORS
 
Kevin P. Connors
 
President, Chief Executive Officer and Director
 
(Principal Executive Officer)

 
 
I, Ronald J. Santilli, certify, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, that

(i) the accompanying Quarterly Report on Form 10-Q of the Company for the quarterly period ended June 30, 2010 (the “Report”) fully complies with the requirements of Section 13(a) or Section 15(d), as applicable, of the Securities Exchange Act of 1934, as amended; and

(ii) the information contained in the Report fairly presents, in all material respects, the financial condition and results of operations of the Company.

Date: August 2, 2010
/S/ RONALD J. SANTILLI
 
Ronald J. Santilli
 
Executive Vice President and Chief Financial Officer
 
(Principal Financial and Accounting Officer)

This certification accompanies this Report pursuant to Section 906 of the Sarbanes-Oxley Act of 2002 and shall not be deemed filed by the Company for purposes of Section 18 of the Securities and Exchange Act of 1934, as amended.